Effect of underdrain types and media specification on friction head losses of media filter /
Mohamed Gamal Hussien Zaki
Effect of underdrain types and media specification on friction head losses of media filter / تأثير أنظمة الصرف وخصائص الوسط الترشيحى على الفاقد فى الضاغط للمرشح الوسطى Mohamed Gamal Hussien Zaki ; Supervised Mohamed Elsayed Abuarab , Mohamed Abdelwahap Kassem , Wael Mahmoud Mokhtar Soltan - Cairo : Mohamed Gamal Hussien Zaki , 2019 - 80 P. : charts , facsimiles ; 25cm
Thesis (M.Sc.) - Cairo University - Faculty of Agriculture - Department of Agriculture Engineering
The main objective of this study was to assess the combination effect of media types, media bed depths, drain types and number of drains on friction head losses in media filter. An experimental study with scaled media filter prototype was conducted with three different media types basalt (1-2.8 mm), crushed marble (1.4-1.9 mm) and sand (1-1.4 mm), three media bed depths (30, 50 and 70 cm), and three commercial underdrain types referred as a single drain (SD1, SD2 and SD3) and double drain (DD1, DD2 and DD3) under three superficial velocities (50, 87.5 and 125 mh-1). Under single drains,The best operating combination i.e. minimum friction head losses HL was achieved using.. (SD2, 30 cm of basalt and 50 mh-1), which was 63.5 mbar. While the maximum HL was 991 mbar resulted by the following combination: SD3, 70 cm of sand and 125 mh-1. On the other hand, as expected the HL values under DD for the three underdrain types were lower than SD. the minimum HL value was 41 mbar under the following combination DD2, 30 cm basalt and 50 mh-1.While the maximum HL was 578.3 mbar for: DD3, 70 cm of sand and 125 mh-1
Friction Head loss Media filter Underdrain
Effect of underdrain types and media specification on friction head losses of media filter / تأثير أنظمة الصرف وخصائص الوسط الترشيحى على الفاقد فى الضاغط للمرشح الوسطى Mohamed Gamal Hussien Zaki ; Supervised Mohamed Elsayed Abuarab , Mohamed Abdelwahap Kassem , Wael Mahmoud Mokhtar Soltan - Cairo : Mohamed Gamal Hussien Zaki , 2019 - 80 P. : charts , facsimiles ; 25cm
Thesis (M.Sc.) - Cairo University - Faculty of Agriculture - Department of Agriculture Engineering
The main objective of this study was to assess the combination effect of media types, media bed depths, drain types and number of drains on friction head losses in media filter. An experimental study with scaled media filter prototype was conducted with three different media types basalt (1-2.8 mm), crushed marble (1.4-1.9 mm) and sand (1-1.4 mm), three media bed depths (30, 50 and 70 cm), and three commercial underdrain types referred as a single drain (SD1, SD2 and SD3) and double drain (DD1, DD2 and DD3) under three superficial velocities (50, 87.5 and 125 mh-1). Under single drains,The best operating combination i.e. minimum friction head losses HL was achieved using.. (SD2, 30 cm of basalt and 50 mh-1), which was 63.5 mbar. While the maximum HL was 991 mbar resulted by the following combination: SD3, 70 cm of sand and 125 mh-1. On the other hand, as expected the HL values under DD for the three underdrain types were lower than SD. the minimum HL value was 41 mbar under the following combination DD2, 30 cm basalt and 50 mh-1.While the maximum HL was 578.3 mbar for: DD3, 70 cm of sand and 125 mh-1
Friction Head loss Media filter Underdrain