header
Image from OpenLibrary

Adaptation and fracture resistance assessment of CAD/ CAM vs. manually milled zirconia copings / Hatem Salah Eldin Mohamed Sadek ; Supervised Hesham Katamish , Mona Attia Alagroudy

By: Contributor(s): Material type: TextTextLanguage: English Publication details: Cairo : Hatem Salah Eldin Mohamed Sadek , 2012Description: 86 Leaves : charts , facsimiles ; 30cmOther title:
  • تطابق و مقاومة الكسر أغطية الزركونيا المصنعة بالكاد كام و يدويا [Added title page title]
Subject(s): Available additional physical forms:
  • Issued also as CD
Dissertation note: Thesis (M.Sc.) - Cairo University - Faculty of Oral and Dental Medicine - Department of Prosthodontics Summary: A total No. of 30 copings, will be constructed using CAD/CAM and manually milled zirconia technology according to the manufacture instructions on specially designed stainless steel dies. These specimens are divided into 2 main equal groups (n = 15) according to method of construction. Each main group will be further subdivided into two three equal subgroups n=5 each according to the testing procedure that will be performed; 5 samples for marginal adaptation, 5 samples for internal fitness, 5 samples for fracture resistance
Tags from this library: No tags from this library for this title. Log in to add tags.
Star ratings
    Average rating: 0.0 (0 votes)
Holdings
Item type Current library Home library Call number Copy number Status Date due Barcode
Thesis Thesis قاعة الرسائل الجامعية - الدور الاول المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.09.09.M.Sc.2012.Ha.A (Browse shelf(Opens below)) Not for loan 01010110059712000
CD - Rom CD - Rom مخـــزن الرســائل الجـــامعية - البدروم المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.09.09.M.Sc.2012.Ha.A (Browse shelf(Opens below)) 59712.CD Not for loan 01020110059712000

Thesis (M.Sc.) - Cairo University - Faculty of Oral and Dental Medicine - Department of Prosthodontics

A total No. of 30 copings, will be constructed using CAD/CAM and manually milled zirconia technology according to the manufacture instructions on specially designed stainless steel dies. These specimens are divided into 2 main equal groups (n = 15) according to method of construction. Each main group will be further subdivided into two three equal subgroups n=5 each according to the testing procedure that will be performed; 5 samples for marginal adaptation, 5 samples for internal fitness, 5 samples for fracture resistance

Issued also as CD

There are no comments on this title.

to post a comment.