header
Local cover image
Local cover image
Image from OpenLibrary

Fracture resistance of ceramic veneered titanium crowns with different surface treatments / Fogra Elnaas Khalifa ; Supervised Ahmed Mohamed Maher Zaki , Gihan Abdelhady Elnaggar

By: Contributor(s): Material type: TextTextLanguage: English Publication details: Cairo : Fogra Elnaas Khalifa , 2014Description: 73 Leaves : photographs ; 30cmOther title:
  • مقاومة كسرتيجان التيتانيوم المكسوة بطرق معالجة السطح المختلفة [Added title page title]
Subject(s): Online resources: Available additional physical forms:
  • Issued also as CD
Dissertation note: Thesis (M.Sc.) - Cairo University - Faculty of Oral and Dental Medicine - Department of Prosthodontics Summary: The purpose of this study was to investigate the effect of different surface treatment (sandblasting, gold coating and acid etching) on the fracture resistance of milled titanium veneered crowns. Twentyone titanium based crown samples were fabricated and randomly assigned into three groups each of seven samples according the titanium surface treatments; Group I: Titanium crowns subjected to sandblasting, Group II: Titanium crowns subjected to gold coating, Group III: Titanium crowns subjected to acid etching. The samples after surface treatment were examined with SEM microscope. Then veneering with low fusing porcelain. Fracture resistance bond strength was tested. Debonded samples were examined with SEM microscope. Data were collected, tabulated and statistically analyzed (p{u2264}0.05). Regarding the effect of surface treatment (sandblasting, acid etching and gold coating) on surface roughness, it was found that; no statistically significant difference between mean Ra values of sandblasting group (1.32 ± 0.20 æm) and acid etching group (1.42 ± 0.30 æm); both recorded the highest mean values. Gold coating (0.17 ± 0.06 æm) recorded statistically significantly lower mean Ra value
Tags from this library: No tags from this library for this title. Log in to add tags.
Star ratings
    Average rating: 0.0 (0 votes)
Holdings
Item type Current library Home library Call number Copy number Status Barcode
Thesis Thesis قاعة الرسائل الجامعية - الدور الاول المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.09.09.M.Sc.2014.Fo.F (Browse shelf(Opens below)) Not for loan 01010110065538000
CD - Rom CD - Rom مخـــزن الرســائل الجـــامعية - البدروم المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.09.09.M.Sc.2014.Fo.F (Browse shelf(Opens below)) 65538.CD Not for loan 01020110065538000

Thesis (M.Sc.) - Cairo University - Faculty of Oral and Dental Medicine - Department of Prosthodontics

The purpose of this study was to investigate the effect of different surface treatment (sandblasting, gold coating and acid etching) on the fracture resistance of milled titanium veneered crowns. Twentyone titanium based crown samples were fabricated and randomly assigned into three groups each of seven samples according the titanium surface treatments; Group I: Titanium crowns subjected to sandblasting, Group II: Titanium crowns subjected to gold coating, Group III: Titanium crowns subjected to acid etching. The samples after surface treatment were examined with SEM microscope. Then veneering with low fusing porcelain. Fracture resistance bond strength was tested. Debonded samples were examined with SEM microscope. Data were collected, tabulated and statistically analyzed (p{u2264}0.05). Regarding the effect of surface treatment (sandblasting, acid etching and gold coating) on surface roughness, it was found that; no statistically significant difference between mean Ra values of sandblasting group (1.32 ± 0.20 æm) and acid etching group (1.42 ± 0.30 æm); both recorded the highest mean values. Gold coating (0.17 ± 0.06 æm) recorded statistically significantly lower mean Ra value

Issued also as CD

There are no comments on this title.

to post a comment.

Click on an image to view it in the image viewer

Local cover image