header
Image from OpenLibrary

The effect of using nano materials on the properties of cement paste and mortar / Mostafa Ahmed Mahdi Sonosi ; Supervised Hossam Abdelghafour Hodhod , Elsaaid Ibrahim Zaki

By: Contributor(s): Material type: TextTextLanguage: English Publication details: Cairo : Mostafa Ahmed Mahdi Sonosi , 2015Description: 114 P. : plans , photographs ; 30cmOther title:
  • تأثير استخدام مواد النانو على خواص العجينة الأسمنتية و المونة [Added title page title]
Subject(s): Available additional physical forms:
  • Issued also as CD
Dissertation note: Thesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Civil Engineering Summary: The experimental program of this thesis included three parts: a- two types of Nano silica, locally produced NS1 and imported NS2, b- Nano clay (NC) and c- Hybrid nano particles (NS1 and NC). In each part, cement paste and mortar were used with different percentages of nano particles. Compressive strength and drying shrinkage tests were applied in each part on the cured and uncured samples. Thermal conductivity and scanning electronic microscope (SEM) tests were conducted on the optimum mortar samples. Finally, feasibility study about the cost of using nano materials in the construction was carried out
Tags from this library: No tags from this library for this title. Log in to add tags.
Star ratings
    Average rating: 0.0 (0 votes)
Holdings
Item type Current library Home library Call number Copy number Status Date due Barcode
Thesis Thesis قاعة الرسائل الجامعية - الدور الاول المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.05.M.Sc.2015.Mo.E (Browse shelf(Opens below)) Not for loan 01010110067838000
CD - Rom CD - Rom مخـــزن الرســائل الجـــامعية - البدروم المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.05.M.Sc.2015.Mo.E (Browse shelf(Opens below)) 67838.CD Not for loan 01020110067838000

Thesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Civil Engineering

The experimental program of this thesis included three parts: a- two types of Nano silica, locally produced NS1 and imported NS2, b- Nano clay (NC) and c- Hybrid nano particles (NS1 and NC). In each part, cement paste and mortar were used with different percentages of nano particles. Compressive strength and drying shrinkage tests were applied in each part on the cured and uncured samples. Thermal conductivity and scanning electronic microscope (SEM) tests were conducted on the optimum mortar samples. Finally, feasibility study about the cost of using nano materials in the construction was carried out

Issued also as CD

There are no comments on this title.

to post a comment.