header
Image from OpenLibrary

Preparation of geopolymer bricks using ceramic wall dust / Aya Aly Mohamed Aboelmagd ; Supervised Magdi Fouad Abadir , Amal Belal Mohamed Ahmed

By: Contributor(s): Material type: TextTextLanguage: English Publication details: Cairo : Aya Aly Mohamed Aboelmagd , 2016Description: 94 P. : photographs ; 30cmOther title:
  • تحضير طوب جيوبوليميرى بإستخدام تراب صناعة سيراميك الحوائط [Added title page title]
Subject(s): Available additional physical forms:
  • Issued also as CD
Dissertation note: Thesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Chemical Engineering Summary: In the present thesis dust from dryer cyclones in ceramic industry was used in the manufacturing of geopolymer bricks. Dust was characterized after firing by using XRD, XRF, PSD and bulk density. Caustic soda was used by the percentages of 1% with Ca(OH)2 percentages of 6 to 10%, mixed with the fired waste and molded to form geopolymer bricks. The properties of produced bricks were studied after 28 days where the bulk density, cold water absorption, boiled water absorption, saturation coefficient, porosity and compressive strength .It is found that the results exhibit an agreement with ASTM C62 / 2013 with the recipe of: 1% NaOH, 10% Ca(OH)2 and 38% water. Also the results were confirmed by photographing the samples by SEM which showed a confirmation with the porosity and the brick composition
Tags from this library: No tags from this library for this title. Log in to add tags.
Star ratings
    Average rating: 0.0 (0 votes)
Holdings
Item type Current library Home library Call number Copy number Status Date due Barcode
Thesis Thesis قاعة الرسائل الجامعية - الدور الاول المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.04.M.Sc.2016.Ay.P (Browse shelf(Opens below)) Not for loan 01010110071064000
CD - Rom CD - Rom مخـــزن الرســائل الجـــامعية - البدروم المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.04.M.Sc.2016.Ay.P (Browse shelf(Opens below)) 71064.CD Not for loan 01020110071064000

Thesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Chemical Engineering

In the present thesis dust from dryer cyclones in ceramic industry was used in the manufacturing of geopolymer bricks. Dust was characterized after firing by using XRD, XRF, PSD and bulk density. Caustic soda was used by the percentages of 1% with Ca(OH)2 percentages of 6 to 10%, mixed with the fired waste and molded to form geopolymer bricks. The properties of produced bricks were studied after 28 days where the bulk density, cold water absorption, boiled water absorption, saturation coefficient, porosity and compressive strength .It is found that the results exhibit an agreement with ASTM C62 / 2013 with the recipe of: 1% NaOH, 10% Ca(OH)2 and 38% water. Also the results were confirmed by photographing the samples by SEM which showed a confirmation with the porosity and the brick composition

Issued also as CD

There are no comments on this title.

to post a comment.