header
Image from OpenLibrary

Behavior of RC flat slabs with horizontal RFT and vertical shear stirrups in punching / Ali Ahmed Moustafa Hegab ; Supervised Magdy Elsayed Kassem , Rasha Tharwat Senousi , Othman Abdulrahman Metkees

By: Contributor(s): Material type: TextTextLanguage: English Publication details: Cairo : Ali Ahmed Moustafa Hegab , 2016Description: 102 P. : ill. ; 30cmOther title:
  • سلوك البلاطات الخرسانية اللاكمرية المسلحة بتسليح افقى و كانات فى القص الثاقب [Added title page title]
Subject(s): Available additional physical forms:
  • Issued also as CD
Dissertation note: Thesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Civil Engineering Summary: The main goal of this research is to study the effect of the horizontal flexural reinforcement, and the use of vertical stirrups as punching shear reinforcement on the punching shear behavior of RC flat slabs. In order to study these effects, six half scale models were fabricated and tested at the concrete laboratory of Faculty of engineering Cairo university. The specimens were divided into two groups; group one where the main parameter was changing the percentage of flexural reinforcement, while in group two it was changing the concentration of the punching stirrups. Moreover, to enhance the study, the six models were simulated using the non-linear finite element program ANSYS which allows for the analysis of the specimens in more details. The results showed that increasing the ratio of the flexural reinforcement increases the punching capacity significantly. Also, using stirrups as punching reinforcement increases the punching capacity, especially, when small spacing is used
Tags from this library: No tags from this library for this title. Log in to add tags.
Star ratings
    Average rating: 0.0 (0 votes)
Holdings
Item type Current library Home library Call number Copy number Status Date due Barcode
Thesis Thesis قاعة الرسائل الجامعية - الدور الاول المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.05.M.Sc.2016.Al.B (Browse shelf(Opens below)) Not for loan 01010110072044000
CD - Rom CD - Rom مخـــزن الرســائل الجـــامعية - البدروم المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.05.M.Sc.2016.Al.B (Browse shelf(Opens below)) 72044.CD Not for loan 01020110072044000

Thesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Civil Engineering

The main goal of this research is to study the effect of the horizontal flexural reinforcement, and the use of vertical stirrups as punching shear reinforcement on the punching shear behavior of RC flat slabs. In order to study these effects, six half scale models were fabricated and tested at the concrete laboratory of Faculty of engineering Cairo university. The specimens were divided into two groups; group one where the main parameter was changing the percentage of flexural reinforcement, while in group two it was changing the concentration of the punching stirrups. Moreover, to enhance the study, the six models were simulated using the non-linear finite element program ANSYS which allows for the analysis of the specimens in more details. The results showed that increasing the ratio of the flexural reinforcement increases the punching capacity significantly. Also, using stirrups as punching reinforcement increases the punching capacity, especially, when small spacing is used

Issued also as CD

There are no comments on this title.

to post a comment.