header
Image from OpenLibrary

Hydroxyapatite precipitation on Ti-6Al-4V and Ti-6Al-7Nb alloys : Effect of surface conditions / Mahmoud Abdelsalam Ibrahim Mohamed ; Supervised Waleed Mohammed Abdelaziz Khalifa , Shimaa Hassan Mohamed Elhadad

By: Contributor(s): Material type: TextTextLanguage: English Publication details: Cairo : Mahmoud Abdelsalam Ibrahim Mohamed , 2017Description: 70 P. : charts , facsimiles ; 30cmOther title:
  • Ti-6Al-7Nb و Ti-6AL-4Vترسيب الهيدروكسى أباتيت على سبائك : تأثير الظروف السطحية [Added title page title]
Subject(s): Available additional physical forms:
  • Issued also as CD
Dissertation note: Thesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Matallurgical Engineering Summary: The commercial Ti-6Al-4V and Ti-6Al-7Nb are finding numerous applications as metallic biomaterials because of its biocompatibility and functionality. However, the optimum surface conditions that enhance the bone osseointegration of such materials are not well established. The current work aims at exploring the effect of the different surface treatments/conditions on enhancing the bone osseointegration of such alloys. This was revealed by investigating the alloy susceptibility to grow Hydroxyapatite on their surfaces after immersion in simulated body fluid (SBF). The alloy samples were produced by forging and casting.The surface conditions investigated were the mechanically-polished, furnace oxidized, alkaline-treated surfaces and hydrothermal treatment. With evident differences being observed between alloy compositions and production processes, the results showed that surface of the polished samples of forged Ti-6Al-7Nb shows high rates of Hydroxyapatite (HA) precipitation, where the surface of oxidized samples highly enhanced the precipitation of whitlockit and Hydroxyapatite precipitation on the sample surfaces of Ti-6Al-7Nb than Ti-6Al-4V. In alkaline treatment a very small amount of Ca⁺⁺ has been traced on the surface of forged & cast Ti-6Al-7Nb where an extra P detected on the surface of Ti-6Al-4V, which show the lack of the effectiveness of the using this technique with Ti-6Al-4V &Ti-6Al-7Nb. The hydrothermal treatment in calcium containing solution show a brushite precipitation in polished samples of Ti-6Al-7Nb, where the Cast samples show whitlockit and HA Precipitation. The study shows the consideration of using static immersion system with SBF than using dynamic system
Tags from this library: No tags from this library for this title. Log in to add tags.
Star ratings
    Average rating: 0.0 (0 votes)
Holdings
Item type Current library Home library Call number Copy number Status Date due Barcode
Thesis Thesis قاعة الرسائل الجامعية - الدور الاول المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.12.M.Sc.2017.Ma.H (Browse shelf(Opens below)) Not for loan 01010110074799000
CD - Rom CD - Rom مخـــزن الرســائل الجـــامعية - البدروم المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.12.M.Sc.2017.Ma.H (Browse shelf(Opens below)) 74799.CD Not for loan 01020110074799000

Thesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Matallurgical Engineering

The commercial Ti-6Al-4V and Ti-6Al-7Nb are finding numerous applications as metallic biomaterials because of its biocompatibility and functionality. However, the optimum surface conditions that enhance the bone osseointegration of such materials are not well established. The current work aims at exploring the effect of the different surface treatments/conditions on enhancing the bone osseointegration of such alloys. This was revealed by investigating the alloy susceptibility to grow Hydroxyapatite on their surfaces after immersion in simulated body fluid (SBF). The alloy samples were produced by forging and casting.The surface conditions investigated were the mechanically-polished, furnace oxidized, alkaline-treated surfaces and hydrothermal treatment. With evident differences being observed between alloy compositions and production processes, the results showed that surface of the polished samples of forged Ti-6Al-7Nb shows high rates of Hydroxyapatite (HA) precipitation, where the surface of oxidized samples highly enhanced the precipitation of whitlockit and Hydroxyapatite precipitation on the sample surfaces of Ti-6Al-7Nb than Ti-6Al-4V. In alkaline treatment a very small amount of Ca⁺⁺ has been traced on the surface of forged & cast Ti-6Al-7Nb where an extra P detected on the surface of Ti-6Al-4V, which show the lack of the effectiveness of the using this technique with Ti-6Al-4V &Ti-6Al-7Nb. The hydrothermal treatment in calcium containing solution show a brushite precipitation in polished samples of Ti-6Al-7Nb, where the Cast samples show whitlockit and HA Precipitation. The study shows the consideration of using static immersion system with SBF than using dynamic system

Issued also as CD

There are no comments on this title.

to post a comment.