header
Image from OpenLibrary

Semi-automated gating system design with optimum gate and overflow positions for HPDC / Mohamed Refaat Aboelfotouh Elbasyony ; Supervised Abdelhalim Elhabak , Ahmed Yahia Shash

By: Contributor(s): Material type: TextTextLanguage: English Publication details: Cairo : Mohamed Refaat Aboelfotouh Elbasyony , 2018Description: 105 P. : charts , facsimiles ; 30cmOther title:
  • تصميم شبه أوتوماتيكي لشبكة التغذية لنظم السبك بالقوالب تحت ضغط عالى مع الوضع الأمثل لمكان المصب و الفيض [Added title page title]
Subject(s): Available additional physical forms:
  • Issued also as CD
Dissertation note: Thesis (Ph.D.) - Cairo University - Faculty of Engineering - Department of Mechanical Design and Production Summary: This thesis studies HPDC die design, by developing a computer software that gives a fully detailed gating system dimensions with optimum gate and overflow locations to get a minimum porosity. Through, study the effect of part parameters i.e. width, length, height, thickness, angle, GSS and OSS on the porosity of the part. Furthermore, four models developed as a part of software validation to ensure the results. These models covered both ZA 3 and Al 306 materials with one-cavity and two-cavity. However, models validated by both simulation and experimental models
Tags from this library: No tags from this library for this title. Log in to add tags.
Star ratings
    Average rating: 0.0 (0 votes)
Holdings
Item type Current library Home library Call number Copy number Status Date due Barcode
Thesis Thesis قاعة الرسائل الجامعية - الدور الاول المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.13.Ph.D.2018.Mo.S (Browse shelf(Opens below)) Not for loan 01010110076678000
CD - Rom CD - Rom مخـــزن الرســائل الجـــامعية - البدروم المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.13.Ph.D.2018.Mo.S (Browse shelf(Opens below)) 76678.CD Not for loan 01020110076678000

Thesis (Ph.D.) - Cairo University - Faculty of Engineering - Department of Mechanical Design and Production

This thesis studies HPDC die design, by developing a computer software that gives a fully detailed gating system dimensions with optimum gate and overflow locations to get a minimum porosity. Through, study the effect of part parameters i.e. width, length, height, thickness, angle, GSS and OSS on the porosity of the part. Furthermore, four models developed as a part of software validation to ensure the results. These models covered both ZA 3 and Al 306 materials with one-cavity and two-cavity. However, models validated by both simulation and experimental models

Issued also as CD

There are no comments on this title.

to post a comment.