header
Image from OpenLibrary

Punching shear behavior of RC flat slabs with embedded steel beams / Bassem Khaled Abdelaziz ; Supervised Hany Abdalla , Rasha Tharwat Senousi

By: Contributor(s): Material type: TextTextLanguage: English Publication details: Cairo : Bassem Khaled Abdelaziz , 2018Description: 96 P. : charts , facsimiles ; 25cmOther title:
  • سلوك القص الثاقب في البلاطات الخرسانية اللاكمرية ذات الكمرات المعدنية المدفونة [Added title page title]
Subject(s): Available additional physical forms:
  • Issued also as CD
Dissertation note: Thesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Civil Engineering Summary: The main objective of this research is to study the punching behavior of flat slabs and the possibility of resisting the punchingshear failure without increasing the slab depth by using embedded crossed steel beams as a shear reinforcement system. An experimental program was carried out at the laboratory of the faculty of engineering Cairo university that consisted of six half scale slab specimens with interior column, in order to study three main parameters: arm length of the embedded steel beams, configuration position of the embedded beams, and increasing the steel beam web thickness using built up section.The experimental results were compared with different design codes in order to investigate the efficiency of using this system in flat slab punching resistance. In addition, modifications to an empirical formula were proposed. The results showed that using steel beams above columns in flat slabs is an effective method to resist punching stresses
Tags from this library: No tags from this library for this title. Log in to add tags.
Star ratings
    Average rating: 0.0 (0 votes)
Holdings
Item type Current library Home library Call number Copy number Status Date due Barcode
Thesis Thesis قاعة الرسائل الجامعية - الدور الاول المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.05.M.Sc.2018.Ba.P (Browse shelf(Opens below)) Not for loan 01010110077106000
CD - Rom CD - Rom مخـــزن الرســائل الجـــامعية - البدروم المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.05.M.Sc.2018.Ba.P (Browse shelf(Opens below)) 77106.CD Not for loan 01020110077106000

Thesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Civil Engineering

The main objective of this research is to study the punching behavior of flat slabs and the possibility of resisting the punchingshear failure without increasing the slab depth by using embedded crossed steel beams as a shear reinforcement system. An experimental program was carried out at the laboratory of the faculty of engineering Cairo university that consisted of six half scale slab specimens with interior column, in order to study three main parameters: arm length of the embedded steel beams, configuration position of the embedded beams, and increasing the steel beam web thickness using built up section.The experimental results were compared with different design codes in order to investigate the efficiency of using this system in flat slab punching resistance. In addition, modifications to an empirical formula were proposed. The results showed that using steel beams above columns in flat slabs is an effective method to resist punching stresses

Issued also as CD

There are no comments on this title.

to post a comment.