header
Image from OpenLibrary

Three-dimensional numerical study of stacked drop manholes / Heba Tarek Ahmed Essawy ; Supervised Ahmad Wagdy Abdeldayem , Ahmed Mohamed Helmi

By: Contributor(s): Material type: TextTextLanguage: English Publication details: Cairo : Heba Tarek Ahmed Essawy , 2018Description: 57 P. : charts , facsimiles ; 30cmOther title:
  • دراسة عددية ثلاثية الابعاد لغرف التفتيش المرحلية المزدوجة [Added title page title]
Subject(s): Available additional physical forms:
  • Issued also as CD
Dissertation note: Thesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Civil Engineering Summary: Drop shaft manholes are usually used in steep slope urban areas in order to reduce the slope of outlet pipes when one or more of the inlet pipes have an invert elevation significantly higher than that of the outlet pipe. Usually the invert elevation of the inlet pipe is designed to be equal to the invert elevation of the manhole but in case of using drop manhole the inlet pipe invert elevation is set to be significantly higher than that of the manhole. Despite the wide usage of drop manholes structures there are no systematical studies that restrict the height of the drop manholes except for the concern of excessive aeration and corrosion in the drainage system as this may lead to poor hydraulic conditions
Tags from this library: No tags from this library for this title. Log in to add tags.
Star ratings
    Average rating: 0.0 (0 votes)
Holdings
Item type Current library Home library Call number Copy number Status Date due Barcode
Thesis Thesis قاعة الرسائل الجامعية - الدور الاول المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.05.M.Sc.2018.He.T (Browse shelf(Opens below)) Not for loan 01010110077526000
CD - Rom CD - Rom مخـــزن الرســائل الجـــامعية - البدروم المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.05.M.Sc.2018.He.T (Browse shelf(Opens below)) 77526.CD Not for loan 01020110077526000

Thesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Civil Engineering

Drop shaft manholes are usually used in steep slope urban areas in order to reduce the slope of outlet pipes when one or more of the inlet pipes have an invert elevation significantly higher than that of the outlet pipe. Usually the invert elevation of the inlet pipe is designed to be equal to the invert elevation of the manhole but in case of using drop manhole the inlet pipe invert elevation is set to be significantly higher than that of the manhole. Despite the wide usage of drop manholes structures there are no systematical studies that restrict the height of the drop manholes except for the concern of excessive aeration and corrosion in the drainage system as this may lead to poor hydraulic conditions

Issued also as CD

There are no comments on this title.

to post a comment.