header
Image from OpenLibrary

The performance of the electro-coagulation in silica, phosphate removal using titanium and stainless-steel as anode and cathode / Ahmed Mohamed Nabil Abdelkader Farahat ; Supervised Hesham Sayed Abdelhalim , Ehab Helmy Rozaik

By: Contributor(s): Material type: TextTextLanguage: English Publication details: Cairo : Ahmed Mohamed Nabil Abdelkader Farahat , 2020Description: 73 P. : charts , facsimiles ; 25cmOther title:
  • كفاءة تقنية الترويب الكهربى فى إزالة السيليكا والفوسفات بإستخدام أقطاب التيتانيومو الصلب المقاوم للصدأ كقطب موجب وقطب سالب على التوالى [Added title page title]
Subject(s): Available additional physical forms:
  • Issued also as CD
Dissertation note: Thesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Civil Engineering Summary: The performance of the electrocoagulation process for Phosphates (PO₄) and Silica (SiO₂) removal from synthetic wastewater using Titanium as anode and Stainless Steel as cathode has been studied under some governing operating variables such as initial pH, applied voltage, electrodes inter-spacing and treatment time and at other fixed variables such as temperature, stirring Rpm, electrodes dimensions and the type and amount of the supporting electrolyte.The results showed that the maximum PO₄ removal efficiency of 99.97% after 90 mn. atpH 4.0 and electrodes spacing of 3cm was achieved at applied volts of 12 while the maximum SiO₂ removal efficiency of 31.18% after 90 min. at pH 7.0 and electrodes spacing of 3cm was achieved at applied volts of 12.The results showed also that decreasing the applied voltage drastically dropped the removal efficiency of both PO4 and SiO₂.
Tags from this library: No tags from this library for this title. Log in to add tags.
Star ratings
    Average rating: 0.0 (0 votes)
Holdings
Item type Current library Home library Call number Copy number Status Date due Barcode
Thesis Thesis قاعة الرسائل الجامعية - الدور الاول المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.05.M.Sc.2020.Ah.P (Browse shelf(Opens below)) Not for loan 01010110081369000
CD - Rom CD - Rom مخـــزن الرســائل الجـــامعية - البدروم المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.05.M.Sc.2020.Ah.P (Browse shelf(Opens below)) 81369.CD Not for loan 01020110081369000

Thesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Civil Engineering

The performance of the electrocoagulation process for Phosphates (PO₄) and Silica (SiO₂) removal from synthetic wastewater using Titanium as anode and Stainless Steel as cathode has been studied under some governing operating variables such as initial pH, applied voltage, electrodes inter-spacing and treatment time and at other fixed variables such as temperature, stirring Rpm, electrodes dimensions and the type and amount of the supporting electrolyte.The results showed that the maximum PO₄ removal efficiency of 99.97% after 90 mn. atpH 4.0 and electrodes spacing of 3cm was achieved at applied volts of 12 while the maximum SiO₂ removal efficiency of 31.18% after 90 min. at pH 7.0 and electrodes spacing of 3cm was achieved at applied volts of 12.The results showed also that decreasing the applied voltage drastically dropped the removal efficiency of both PO4 and SiO₂.

Issued also as CD

There are no comments on this title.

to post a comment.