TY  - BOOK
AU  - Hussein Abdelazizabdelgawad Hegab 
AU  - Amal K. Esawi , 
AU  - Mohamed H. Gadallah , 
AU  - Tarek Abdelsadek Osman , 
TI  - Modeling and optimization of electrical discharge machining (EDM) using statistical design / 
PY  - 2014///
CY  - Cairo : 
PB  - Hussein Abdelaziz Abdelgawad Hegab , 
KW  - AL-CNT composites
KW  - Response Surface Methodology (RSM)
KW  - Taguchi approach
N1  - Thesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Mechanical Design and Production; Issued also as CD
N2  - The objective of this work is to optimize Electrical Discharge Machining process  parameters of (AL-CNT) in order to reach to optimal Material Removal Rate (MRR),  Electrode Wear Ratio (EWR) and Average Surface Roughness (Ra). The Machining  parameters are machining-on time (Sec), Discharge Current (A), Voltage (V), total  depth of cut (mm), and %wt. CNT added. Another objective is to build mathematical  models for all responses as function of significant process parameters using RSM.  Experimental results show optimum levels for material removal rate at %wt. CNT  (0%), high level of discharge current (6A) and low level of voltage (50 volts), optimum  levels for Wear electrode ratio at %wt. CNT (5%), high level of discharge current (6A)  and optimum levels for average surface roughness at % wt. CNT (0%), low level of  discharge current (2A) and high level of depth of cut (1mm)
UR  - http://172.23.153.220/th.pdf
ER  -