TY  - BOOK
AU  - Mai Hassan Elsayed Sharaf Eldeen Roushdy
AU  - Magdi Fouad Abadir , 
AU  - Shereen Kamel Amin Kamel , 
TI  - Reuse of ceramic kiln rollers waste in the manufacture of membranes for nanofiltration / 
PY  - 2017///
CY  - Cairo : 
PB  - Mai Hassan Elsayed Sharaf Eldeen Roushdy , 
KW  - Ceramic membranes
KW  - Firing conditions
KW  - Kiln rollers
N1  - Thesis (Ph.D.) - Cairo University - Faculty of Engineering - Department of Chemical Engineering; Issued also as CD
N2  - The kiln rollers waste is recycled and used as raw material in the production of ceramic membranes for use in water filtration. The powder waste was analyzed by XRF for chemical composition, XRD for mineralogical composition, DTA and TGA for thermal analysis, TEM, and particle size distribution. The support ceramic membrane samples were formed into disks by using organic binder (PVA) with different concentrations, and pressed at 25 and 35.5 MPa, dried then fired at temperatures ranging from 1100 to 1300{u00B0}C for different soaking times. The following properties were then investigated: Apparent and closed porosity, bulk density, and water absorption. The values of filtrate water quality and salt separation were determined for a feed with different turbidity and salt concentration. It was found the best firing temperature of ceramic membrane is equal to 1250{u02DA}C, as it gave the highest values for the salt separation percentage and turbidity removal
ER  -