header
Local cover image
Local cover image
Image from OpenLibrary

Surface treatment of low carbon steel by friction stir processing / Mohamed Salah Mohamed Newishy ; Supervised Mohamed Raafat Elkoussy , Nahed Ahmed Abdelraheem , Morsy Amin Morsy

By: Contributor(s): Material type: TextTextLanguage: English Publication details: Cairo : Mohamed Salah Mohamed Newishy , 2014Description: 121 P. : charts , facsimiles ; 30cmOther title:
  • المعالجة السطحية للصلب قليل الكربون باستخدام الإحتكاك التقليبي [Added title page title]
Subject(s): Online resources: Available additional physical forms:
  • Issued also as CD
Dissertation note: Thesis (Ph.D.) - Cairo University - Faculty of Engineering - Department of Metallurgical Engineering Summary: An investigation was carried out to evaluate the feasibility of Friction Stir Powder Processing (FSPP) to produce particle reinforced Metal Matrix Composite materials. WC and TiB2 ceramic particles with particle sizes of 5 and 2 micron respectively were used as reinforcement particles. 2 mm depth surface layer of processed material were produced by multiple FSPP pass. The average hardness of the resulted composites increased to over 600 and 550 HV for steel/WC and Steel/TiB2 composite layer respectively. The fabricated steel/WC and Steel/TiB2 composite layer exhibited superior wear resistance
Tags from this library: No tags from this library for this title. Log in to add tags.
Star ratings
    Average rating: 0.0 (0 votes)
Holdings
Item type Current library Home library Call number Copy number Status Barcode
Thesis Thesis قاعة الرسائل الجامعية - الدور الاول المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.12.Ph.D.2014.Mo.S (Browse shelf(Opens below)) Not for loan 01010110065708000
CD - Rom CD - Rom مخـــزن الرســائل الجـــامعية - البدروم المكتبة المركزبة الجديدة - جامعة القاهرة Cai01.13.12.Ph.D.2014.Mo.S (Browse shelf(Opens below)) 65708.CD Not for loan 01020110065708000

Thesis (Ph.D.) - Cairo University - Faculty of Engineering - Department of Metallurgical Engineering

An investigation was carried out to evaluate the feasibility of Friction Stir Powder Processing (FSPP) to produce particle reinforced Metal Matrix Composite materials. WC and TiB2 ceramic particles with particle sizes of 5 and 2 micron respectively were used as reinforcement particles. 2 mm depth surface layer of processed material were produced by multiple FSPP pass. The average hardness of the resulted composites increased to over 600 and 550 HV for steel/WC and Steel/TiB2 composite layer respectively. The fabricated steel/WC and Steel/TiB2 composite layer exhibited superior wear resistance

Issued also as CD

There are no comments on this title.

to post a comment.

Click on an image to view it in the image viewer

Local cover image