| 000 | 017990000a22003130004500 | ||
|---|---|---|---|
| 003 | EG-GICUC | ||
| 005 | 20250223024920.0 | ||
| 008 | 070529s2007 ua a f m 000 0 Eng d | ||
| 040 |
_aEG-GICUC _beng _cEG-GICUC |
||
| 041 | 0 | _aEng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.08.M.Sc.2007.Hi.F | ||
| 100 | 0 | _aHisham Gamal Mohamed Daoud | |
| 245 | 1 | 0 |
_aFault detection and diagnosis in differential and / or ac coupled circuits / _cHisham Gamal Mohamed Daoud ; Supervised Amin Mohamed Nassar |
| 246 | 1 | 5 | _aاكتشاف و تحديد اعطال فى الدوائرالتباينية والدوائرالمتصلة عبر التيار المتردد |
| 260 |
_aCairo : _bHisham Gamal Mohamed Daoud , _c2007 |
||
| 300 |
_a108P. : _bill. ; _c30Cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty Of Engineering - Department Of Electronics and Communications | ||
| 520 | _aThe boundary scan technique doesn{u2019}t have the ability to address the differential and AC coupled circuits due to the requirements of AC test signal and also the test signal detection based on edge detection.For that purpose , the IEEE 1149.6 standard was developed.In this work , a study of this Standard is accomplished and a case study of LVDS circuit is used to verify the efficiency of the standard from the side of fault detection and diagnosis , by applying the standard to the Circuit Under Test and analyzing the simulation results of the both fault - free and faulty cases for different kinds of faults. | ||
| 530 | _aIssued as also CD | ||
| 653 | 4 | _aCoupled circuits | |
| 653 | 4 | _aFault detection | |
| 700 | 0 |
_aAmin Mohamed Nassar , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aAml _eCataloger |
||
| 905 |
_aEsam _eRevisor |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c1780 _d1780 |
||