| 000 | 01871cam a2200349 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223030255.0 | ||
| 008 | 100918s2009 ua dh f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.09.09.M.Sc.2009.As.E | ||
| 100 | 0 | _aAshraf Ahmed Mohamed Saad | |
| 245 | 1 | 4 |
_aThe effect of implant length and diameter on stress distribution of overdenture in kennedy class II cases : _bThree-dimensional finite element analysis / _cAshraf Ahmed Mohamed Saad ; Supervised Ashraf Emil Eskander , Maha Wagdi , Sahar Ali Fawzy |
| 246 | 1 | 5 | _aتأثير طول و قطر الغرسة المعدنية على توزيع الضغوط في حالات التقسيم الثاني لكينيدي |
| 260 |
_aCairo : _bAshraf Ahmed Mohamed Saad , _c2009 |
||
| 300 |
_a127 Leaves : _bcharts , facsimiles ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Oral and Dental Medicine - Department of Prosthodontics | ||
| 520 | _aA finite element analysis study was carried out to evaluate the effect of implant length and diameter on stresses distribution around an implant used as distal support in kennedy class II implant supported partial overdenture. It was found that the stresses in the surrounding structures decrease with the increase of both the implant length and diameter. The implant diameter was found to be more effective factor | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aFinite element analysis | |
| 653 | 4 | _aKennedy class II cases | |
| 653 | 4 | _aStresses | |
| 700 | 0 |
_aAshraf Emil Eskander , _eSupervisor |
|
| 700 | 0 |
_aMaha Wagdi Elkerdawy , _eSupervisor |
|
| 700 | 0 |
_aSahar Ali Fawzy , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aMustafa _eRevisor |
||
| 905 |
_aSamia _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c31319 _d31319 |
||