000			02018cam a2200349 a 4500
003			EG-GiCUC
005			20250223030551.0
008			120219s2011 ua dh f m 000 0 eng d
040			_aEG-GiCUC _beng _cEG-GiCUC
041	0		_aeng
049			_aDeposite
097			_aM.Sc
099			_aCai01.24.11.M.Sc.2011.Gh.L
100	0		_aGhada Omar Elsayed Khalil Daoud
245	1	0	_aLaser induced effect on the physical properties of nanometric ferrite : _bNi {u0353} Mn₀.₈-₂Mg₀.₂Fe₂O₄j 0 {u2264} x {u2264} 0.40 / _cGhada Omar Elsayed Khalil Daoud ; Supervised M. A. Ahmed , Mohy Saad Mansour , Jala Mahmoud Elazab
246	1	5	_aتأثير التشعيع بالليزر على الخواص الفيزيائية للفرييت ذو الخواص النانومترية : _bNi {u0353} Mn₀.₈- {u0353}{u0353} Mg₀.₂Fe₂O₄j 0 {u2264} x {u2264} 0.40
260			_aCairo : _bGhada Omar Elsayed Khalil Daoud , _c2011
300			_a110 P. : _bcharts , facsimiles ; _c25cm
502			_aThesis (M.Sc.) - Cairo University - National Institute of Laser Enhanced Science - Department of Laser Application in Engineering
520			_aThe samples were prepared by two different methods standard ceramic technique and co-precipitation method . In the first method weighing metal oxides in stoichimetric ratios then the mixture are grinded together for 3 hours . The powder was pressed using uniaxial press of pressure 1.9 x 10 ⁸ Nm -² , presintered at 900 {u00BA}C for 10 hours using heating rate of 4 {u00BA}C / min and final sintering at 1200 {u00BA}C for 7 hours at the same rate
530			_aIssued also as CD
653		4	_aLaser induced effect
653		4	_aNanometric ferrite
653		4	_aPhysical properties
700	0		_aJala Mahmoud Elazab , _eSupervisor
700	0		_aMohamed Aly Ahmed , _eSupervisor
700	0		_aMohy Saad Mansour , _eSupervisor
856			_uhttp://172.23.153.220/th.pdf
905			_aFatma _eCataloger
905			_aNazla _eRevisor
942			_2ddc _cTH
999			_c37443 _d37443