| 000 | 01736cam a2200325 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223030737.0 | ||
| 008 | 130113s2012 ua h f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aPh.D | ||
| 099 | _aCai01.13.07.Ph.D.2012.Wa.I | ||
| 100 | 0 | _aWael Mohamed Mahmoud Mohamed | |
| 245 | 1 | 0 |
_aIntelligent direct torque control for PMSM drive using ANFIS technique / _cWael Mohamed Mahmoud Mohamed ; Supervised Ahmed Alaa Mahfouz Elkousy |
| 246 | 1 | 5 | _aالتحكم الذكى المباشر فى العزم للمحرك التزامنى ذى المغناطيس الدائم باستخدام تكنولوجيا أنظمة مواءمة الاستنتاج العشوائى الذكى |
| 260 |
_aCairo : _bWael Mohamed Mahmoud Mohamed , _c2012 |
||
| 300 |
_a202P. : _bcharts , facsimiles ; _c30cm |
||
| 502 | _aThesis (Ph.D.) - Cairo University - Faculty of Engineering - Department of Electrical Power and Machines | ||
| 520 | _aThe principle of DTC is to directly select voltage vectors according to the difference between reference and actual value of torque and flux linkage . Torque and flux erros are compared in hysterisis comparators . Depending on the comparators a voltage vector is selected from a table . Accordingly , the actual values for the torque , flux and the rotor position can be precisely measured\estimated with minimum delay or deviation | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aANFIS | |
| 653 | 4 | _aDTC | |
| 653 | 4 | _aPMSM | |
| 700 | 0 |
_aAhmed Alaa Mahfouz Elkousy , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aFatma _eCataloger |
||
| 905 |
_aNazla _eRevisor |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c41031 _d41031 |
||