| 000 | 01861cam a2200337 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223030739.0 | ||
| 008 | 130115s2012 ua dh f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.09.13.M.Sc.2012.Sh.R | ||
| 100 | 0 | _aSharif Khattab Hussain Mohamad | |
| 245 | 1 | 0 |
_aRigid versus non - rigid splinting for autotransplantated lower third molar to replace another non - restorable lower molar / _cSharif Khattab Hussain Mohamad ; Supervised Khaled Atef Elhayes , Nermeen Hassanien Souror |
| 246 | 1 | 5 | _aالتجبير القاسى مقابل التجبير اللين للطاحن السفلى الثالث المزروع ذاتيا ليحل محل طاحن سفلى آخر غير قابل للتعويض |
| 260 |
_aCairo : _bSharif Khattab Hussain Mohamad , _c2012 |
||
| 300 |
_a105Leaves : _bcharts , facsimiles ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Oral and Dental Medicine - Department of Oral and Maxillofacial Surgery | ||
| 520 | _aThe principle aim of this investigation was to evaluate the influence of heat treatment on the fracture toughness and microstructure of yttria - stabilized tetragonal zirconia polycrystals (Y -TZP) substrate . Forty ceramic discs (10-mm x 4-mm ) were prepared from YZ blocks using CAD\CAM technology and divided into four groups according to frequency of the heat treatments , ten samples for each Group | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aFracture toughness | |
| 653 | 4 | _aHeat treatment | |
| 653 | 4 | _aY-TZP ceramic | |
| 700 | 0 |
_aKhaled Atef Elhayes , _eSupervisor |
|
| 700 | 0 |
_aNermeen Hassanien Souror , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aFatma _eCataloger |
||
| 905 |
_aNazla _eRevisor |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c41093 _d41093 |
||