| 000 | 01815cam a2200349 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223030745.0 | ||
| 008 | 130127s2012 ua dh f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.08.M.Sc.2012.Om.D | ||
| 100 | 0 | _aOmar Abdulmonem Mohamed Elsayed | |
| 245 | 1 | 0 |
_aDesign and fabrication of 50 GHz mm- wave VCO / _cOmar Abdulmonem Mohamed Elsayed ; Supervised Essam A. Hashish , Ahmed A. Emira , Mohamed M. Aboudina |
| 246 | 1 | 5 | _aتصميم وتصنيع مذبذب متحكم به عن طريق الجهد يعمل فى الحيز الترددى المليمترى عند 50 جيجا هرتز |
| 260 |
_aCairo : _bOmar Abdulmonem Mohamed Elsayed , _c2012 |
||
| 300 |
_a54P. : _bcharts , facsimiles ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Electronics and Communication | ||
| 520 | _aIn the past decade CMOS millimeter wave (mm- wave) circuits have been implemented for short - range high data rate applications . This has resulted in significant cost reduction compared to the conventional monolithic microwave integrated circuit (MMIC) technologies such as GaAs . At such high frequencies distributed elements such as transmission lines are widely used smaller size and lower parasitics compared to the lumped inductive elements | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _a50 GHz | |
| 653 | 4 | _amm- wave | |
| 653 | 4 | _aVCO | |
| 700 | 0 |
_aAhmed Ahmed Aladawy Emira , _eSupervisor |
|
| 700 | 0 |
_aEssam Abdelhalem Hashish , _eSupervisor |
|
| 700 | 0 |
_aMohamed Mostafa Aboudina , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aSoheir _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c41285 _d41285 |
||