| 000 | 01585cam a2200301 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 008 | 130304s2012 ua dh f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.07.M.Sc.2012.El.P | ||
| 100 | 0 | _aElham Mohamed Darwish | |
| 245 | 1 | 0 |
_aPower factor correction in an industrial factory in the existence of rich harmonics / _cElham Mohamed Darwish ; Supervised Ahdab M. K Elmorshedy |
| 246 | 1 | 5 | _aتحسين معامل القدرة لمصنع فى وجود توافقيات عالية |
| 260 |
_aCairo : _bElham Mohamed Darwish , _c2012 |
||
| 300 |
_a159P. : _bcharts , facsimiles ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Electrical Power and Machines | ||
| 520 | _aThe main goal of this thesis is to study the power factor correction of industrial loads in presence of rich harmonics by using drtuned filters in factory at 6 {u036D} {u036A} October city to a void the penalty and to obtain bonus due to over correcting . This study is split into two parts the first part is the real measurements using megger PA-9 plus device to record PF the second part is simulation of a case study by ETAP software to calculate PF and (1,VTHD) | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aDesign of filter | |
| 653 | 4 | _aHarmonics | |
| 653 | 4 | _aPower factor correction | |
| 700 | 0 |
_aAhdab Mohamed Kamel Elmorshedy , _eSupervisor |
|
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aSoheir _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c41827 _d41827 |
||