| 000 | 01794cam a2200337 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223030809.0 | ||
| 008 | 130320s2012 ua do f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aPh.D | ||
| 099 | _aCai01.09.05.Ph.D.2012.No.E | ||
| 100 | 0 | _aNoha Ossama Abdelaziz Issa | |
| 245 | 1 | 0 |
_aEvaluation of the accuracy of three dimensional printed mandibular models generated from cone beam computed tomography data / _cNoha Ossama Abdelaziz Issa ; Supervised Nashwa Salah Mohamed , Hany Omar |
| 246 | 1 | 5 | _aتقييم دقة نماذج الفك السفلي ثلاثية الأبعاد الناتجة من معطيات الأشعة المقطعية ذات الشعاع المخروطي |
| 260 |
_aCairo : _bNoha Ossama Abdelaziz Issa , _c2012 |
||
| 300 |
_a112 Leaves : _bcharts , photographs ; _c30cm |
||
| 502 | _aThesis (Ph.D.) - Cairo University - Faculty of Oral and Dental Medicine - Department of Oral-Radiology | ||
| 520 | _aTo evaluate the dimensional accuracy of both, cone beam computed tomography and the three dimensional printed models which are generated from cone beam computed tomography data using a three dimensional printer. Ten dummy mandibular models simulating atrophic human bone were used in this study. Implants having length 16 mm were inserted after preparation in the dummy models in different sites | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aCone beam computed tomography | |
| 653 | 4 | _aDummy models | |
| 653 | 4 | _aThree dimensional printing | |
| 700 | 0 |
_aHany Omar , _eSupervisor |
|
| 700 | 0 |
_aNashwa Salah Mohamed , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aSamia _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c42131 _d42131 |
||