| 000 | 01887cam a2200349 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223030827.0 | ||
| 008 | 130424s2012 ua dh f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aPh.D | ||
| 099 | _aCai01.13.12.Ph.D.2012.Am.C | ||
| 100 | 0 | _aAmer Ahmed Abdelhkeam Abdelmageed | |
| 245 | 1 | 0 |
_aComparison between fusion , friction strir and hybrid MIG friction stir welding of high strength aluminum alloys (2024 and 7075) / _cAmer Ahmed Abdelhkeam Abdelmageed ; Supervised Mohamed Raafat Elkoussy , Nahed Ahmed Abdelraheem , Mohamed Mosalam Ghanem |
| 246 | 1 | 5 | _aMIGFSW-FSW GTAW دراسة مقارنة بين خواص لحامات سبائك الالومنيوم(2024,7075) بطرق |
| 260 |
_aCairo : _bAmer Ahmed Abdelhkeam Abdelmageed , _c2012 |
||
| 300 |
_a202 P. : _bcharts , facsimiles ; _c30cm |
||
| 502 | _aThesis (Ph.D.) - Cairo University - Faculty of Engineering - Department of Metallurgical Engineering | ||
| 520 | _aIn this research study , welding of two alloys 2024 and 7075 was done by TIG , FSW and MIG - FSW to get high quality welds . It was found that no hot cracks were observed when welding of alloy 2024 started at 10 mm from edge of the strip . Preheating of 7075 reduced the length of the cracks significantly . Postweld heat treatment increased joints efficiency to 82% of the tensile strength of base material | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aFriction stir welding (FSW) | |
| 653 | 4 | _aMetal inert gas (MIG) | |
| 653 | 4 | _aTungsten inert gas (TIG) | |
| 700 | 0 |
_aMohamed Mosalam Ghanem , _eSupervisor |
|
| 700 | 0 |
_aMohamed Raafat Elkoussy , _eSupervisor |
|
| 700 | 0 |
_aNahed Ahmed Abdelraheem , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aFatma _eCataloger |
||
| 905 |
_aNazla _eRevisor |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c42775 _d42775 |
||