| 000 | 01689cam a2200337 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223030930.0 | ||
| 008 | 140127s2012 ua dh f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.09.09.M.Sc.2012.Ma.E | ||
| 100 | 0 | _aManar Ali Alfadhli | |
| 245 | 1 | 0 |
_aEffect of rate of cooling on the bond strength between titanium and veneer layer / _cManar Ali Alfadhli ; Supervised Ahmad Naguib Mohammed , Zeinab Nabil Emam |
| 246 | 1 | 5 | _aتاثير درجة التبريد على قوة الربط بين التيتانيوم المخروط وطبقة البورسلين |
| 260 |
_aCairo : _bManar Ali Alfadhli , _c2012 |
||
| 300 |
_a95 Leaves : _bcharts , facsimiles ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Oral and Dental Medicine - Department of Prosthodontics | ||
| 520 | _aMaterials & methods: The specimens were equally divided into 2groups according to alloys ten specimens of miling titanium alloy and ten specimens of casting Ni-Cr (25mm x3mm x 0.5 mm). The specimens in each group were further divided into 2 subgroups according to the rate of cooling Rapid: lowering the plat form to most inferior position and removing spacemen from furnace and allowing to cool to room temperature | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aBond strength | |
| 653 | 4 | _aRate of cooling | |
| 653 | 4 | _aTitanium | |
| 700 | 0 |
_aAhmad Naguib Mohammed , _eSupervisor |
|
| 700 | 0 |
_aZeinab Nabil Emam , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aAml _eCataloger |
||
| 905 |
_aNazla _eRevisor |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c44952 _d44952 |
||