| 000 | 01860cam a2200349 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223030940.0 | ||
| 008 | 140311s2012 ua o f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.09.09.M.Sc.2012.Sa.C | ||
| 100 | 0 | _aSamira Atef Sayed | |
| 245 | 1 | 0 |
_aComparative evaluation of the internal adaptation of milled titanium and cast nickel- chromium single restorations / _cSamira Atef Sayed ; Supervised Jylan Fouad Elguindy , Hanan Naguib , Sahar Zaki |
| 246 | 1 | 5 | _aدراسة مقارنة الاحكام الداخلى لتيجان التيتانيوم المخروط و سبائك النيكركروم المصنع بطريقة الصب |
| 260 |
_aCairo : _bSamira Atef Sayed , _c2012 |
||
| 300 |
_a93 Leaves : _bphotographs ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Oral and Dental Medicine - Department of Prosthodontics | ||
| 520 | _aTitanium is the most biocompatible metal used for dental casting; however, there is concern about its marginal accuracy in compare to the nickel- chrumium alloy. The purpose of this study was to evaluate and compare the marginal accuracy and internal fit of milled titanium and cast nickel- chromium single unit restorations. Milled titanium copings (n=20) and cast Ni=Cr copings (n=20) were fabricated with different axial taper (6, 10 degree) and finish line shoulder, chamfer | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aInternal adaptation | |
| 653 | 4 | _aProsthodontics | |
| 653 | 4 | _aTitanium | |
| 700 | 0 |
_aHanan Naguib , _eSupervisor |
|
| 700 | 0 |
_aJylan Fouad Elguindy , _eSupervisor |
|
| 700 | 0 |
_aSahar Zaki , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aSamia _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c45326 _d45326 |
||