| 000 | 02020cam a2200349 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223031113.0 | ||
| 008 | 141130s2014 ua h f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aPh.D | ||
| 099 | _aCai01.13.13.Ph.D.2014.Ah.P | ||
| 100 | 0 | _aAhmed Samy Yousef Saed | |
| 245 | 1 | 0 |
_aProduction of carbon nanotubes using fully automatic machine and its application in polymer gear design / _cAhmed Samy Yousef Saed ; Supervised Ali Ahmed Mostafa Kattaba , Tarek Abdelsadek Osman , Mostafa Zaki Mohammed |
| 246 | 1 | 5 | _aإنتاج الأنابيب النانو كربونية باستخدام ماكينة أوتوماتيكية و تطبيقاتها فى تصميم التروس البوليمرية |
| 260 |
_aCairo : _bAhmed Samy Yousef Saed , _c2014 |
||
| 300 |
_a72 P. : _bfacsimiles ; _c30cm |
||
| 502 | _aThesis (Ph.D.) - Cairo University - Faculty of Engineering - Department of Mechanical Design and Production | ||
| 520 | _a The main goal of the present work is to develop a complete design of fully automatic system for producing carbon nanotubes CNT by using deionized water and extra pure graphite multiple electrodes. In addition, the object of the experimental research is to determine the yield of CNT in two different cases; a) single plasma electrodes, and b) multi plasma electrodes particularly 10 electrodes. The experiments were performed at constant parameters (400A, 75V). It is also aimed in this work is to study the wear behavior of spur gears made polymer blended by carbon nanotubes | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aArc - discharge | |
| 653 | 4 | _aCarbon nanotubes | |
| 653 | 4 | _aPolymer | |
| 700 | 0 |
_aAli Ahmed Mostafa Kattaba , _eSupervisor |
|
| 700 | 0 |
_aMostafa Zaki Mohammed , _eSupervisor |
|
| 700 | 0 |
_aTarek Abdelsadek Osman , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aSamia _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c48488 _d48488 |
||