000 | 02091cam a2200349 a 4500 | ||
---|---|---|---|
003 | EG-GiCUC | ||
005 | 20250223031119.0 | ||
008 | 141213s2014 ua eh f m 000 0 eng d | ||
040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
041 | 0 | _aeng | |
049 | _aDeposite | ||
097 | _aPh.D | ||
099 | _aCai01.13.13.Ph.D.2014.Al.T | ||
100 | 0 | _aAlaa Eldin Mohamed Abdelhamid Aly | |
245 | 1 | 0 |
_aTribological and rheological behavior of carbon nanotubes as an additive on lithium grease / _cAlaa Eldin Mohamed Abdelhamid Aly ; Supervised Tarek Abdelsadek Osman , Ali Ahmed Mostafa Khattab , Mostafa Zaki Mohamed |
246 | 1 | 5 | _aالخواص التريبولوجية و الريولوجية لشحوم الليثيوم المضاف اليھا انابيب الكربون النانوميترية |
260 |
_aCairo : _bAlaa Eldin Mohamed Abdelhamid Aly , _c2014 |
||
300 |
_a92 P. : _bplans , facsimiles ; _c30cm |
||
502 | _aThesis (Ph.D.) - Cairo University - Faculty of Engineering - Department of Mechanical Design and Production | ||
520 | _aThe main objective of this thesis was to evaluate the effect of various weight percentages of CNTs on the tribological and rheological properties of lithium grease. CNTs with an average diameter size 10 nm and 5 om in length were synthesized by electric arc discharge and could be well dispersed in lithium grease. The results show that the grease with CNTs exhibit good performance in anti - wear, friction reduction, load carrying capacity and extreme pressure properties with only 1% wt. CNTs. The rheological behaviors were evaluated with a Brookfield. The results indicate increases stress and apparent viscosity | ||
530 | _aIssued also as CD | ||
653 | 4 | _aCarbon nanotubes | |
653 | 4 | _aRheological behavior | |
653 | 4 | _aTribological behavior | |
700 | 0 |
_aAli Ahmed Mostafa Khattab , _eSupervisor |
|
700 | 0 |
_aMostafa Zaki Mohamed , _eSupervisor |
|
700 | 0 |
_aTarek Abdelsadek Osman , _eSupervisor |
|
856 | _uhttp://172.23.153.220/th.pdf | ||
905 |
_aNazla _eRevisor |
||
905 |
_aSamia _eCataloger |
||
942 |
_2ddc _cTH |
||
999 |
_c48698 _d48698 |