000 01996cam a2200337 a 4500
003 EG-GiCUC
005 20250223031306.0
008 150909s2014 ua dho f m 000 0 eng d
040 _aEG-GiCUC
_beng
_cEG-GiCUC
041 0 _aeng
049 _aDeposite
097 _aM.Sc
099 _aCai01.13.13.M.Sc.2014.Am.I
100 0 _aAmr Mahmoud Ali
245 1 0 _aInfluence of water salinity on the welded stainless steel joints /
_cAmr Mahmoud Ali ; Supervised Abdelhalem Elhabak , Ala Elmokadem
246 1 5 _a{uFE97}{uFE84}{uFE9B}{uFBFE}ر {uئإإ٣}{uئإإ٠}و{uئإء٣}{uئإ٩٤} ا{uئإؤئ}{uئإإ٣}{uئآئإ}{uئإ٨إ}ه {uئإأآ}{uئإإ٠}{uئإئ٠} و{uئإآآ}{uئإئأ}ت {uئإآآ}{uئإإ٠}ب {uئإئآ} {uئآئإ}{uئإآآ}دأ
260 _aCairo :
_bAmr Mahmoud Ali ,
_c2014
300 _a82 P. :
_bcharts , facsimiles , photographs ;
_c30cm
502 _aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Mechanical Design and Production
520 _aInvestigations of the reverse osmosis plants from a point of corrosion are essential. In this study we will discuss the factors affecting the corrosion of welded Austenitic SS alloys. We started the experimental work by testing a welded stainless steel 904 L specimens using tension and bending tests. Potentiodynamic polarization test was used. Then an investigation under a metallurgical microscope is done. XRD test was used to obtain the phases of each alloy. Results show that SS 316L is more susceptible to corrosion than SS 904 L. We made a comparison due to the price and corrosion rate
530 _aIssued also as CD
653 4 _aCorrosion
653 4 _aStainless steel welding joints
653 4 _aWater desalination planets
700 0 _aAbdelhalem Elhabak ,
_eSupervisor
700 0 _aAla Elmokadem ,
_eSupervisor
856 _uhttp://172.23.153.220/th.pdf
905 _aEnas
_eCataloger
905 _aNazla
_eRevisor
942 _2ddc
_cTH
999 _c52296
_d52296