| 000 | 02553cam a2200349 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223031333.0 | ||
| 008 | 151110s2015 ua d f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.12.M.Sc.2015.Mo.E | ||
| 100 | 0 | _aMostafa Ahmed Abdelhamed Ahmed | |
| 245 | 1 | 0 |
_aEffect of austempering parameters on the microstructure, mechanical properties, and machinability of austempered ductile iron / _cMostafa Ahmed Abdelhamed Ahmed ; Supervised Abdelhamid Ahmed Hussein , Elsayed Mahmoud Elbanna , Mohammed Abdelwahab Waly |
| 246 | 1 | 5 | _a (ADI)تأثير تغيرات المراجعة الأوستينيتية على البنية والخواص الميكانيكية والقابلية للتشغيل للزهر عالى المتانة |
| 260 |
_aCairo : _bMostafa Ahmed Abdelhamed Ahmed , _c2015 |
||
| 300 |
_a77 P. : _bcharts ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Engineering- Department of Metallurgical Engineering | ||
| 520 | _aWhen ADI was introduced to be used for engineering applications, there were many problems experienced in trying to machine it. The first point of this research aims at Producing ADI samples with different microstructures and hardness levels. Heat treatment procedures will cover novel techniques (two-step austempering). This study will cover the effect of alloying element as well as influences the austempering temperature on the mechanical properties and wear behaviour of austempered ductile iron. The second point designed to measure the machinability of different ADI grades and determine the optimum machinability parameters such as cutting speed, feed rate, and depth of cut using taguchi method. Finally, point three designed to study the phase transformation during machining different grades of ADI at different machining trials. Also perform a quantitative analysis of the change in the volume fraction of retained austenite and martensite produce during different machining trials by using XRD and heat tinting techniques | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aAustempering heat treatment | |
| 653 | 4 | _aDuctile iron | |
| 653 | 4 | _aMicrostructure | |
| 700 | 0 |
_aAbdelhamid Ahmed Hussein , _eSupervisor |
|
| 700 | 0 |
_aElsayed Mahmoud Elbanna , _eSupervisor |
|
| 700 | 0 |
_aMohammed Abdelwahab Waly , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aAml _eCataloger |
||
| 905 |
_aNazla _eRevisor |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c53215 _d53215 |
||