| 000 | 01682cam a2200313 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 008 | 160313s2015 ua o f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.13.M.Sc.2015.Ma.M | ||
| 100 | 0 | _aMark Nassef Naguib Youssef | |
| 245 | 1 | 0 |
_aModeling and experimental study of centrifugally cast bi - metal roll / _cMark Nassef Naguib Youssef ; Supervised Ragaie Mohamed Rashad , Chahinaz Abdelrahman Saleh |
| 246 | 1 | 5 | _aنمذجة و دراسة معملية للدرافيل ثنائية المعدن المصبوبة بالطرد المركزى |
| 260 |
_aCairo : _bMark Nassef Naguib Youssef , _c2015 |
||
| 300 |
_a119 P. : _bphotographs ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Mechanical Design and Production | ||
| 520 | _aIn this thesis, the centrifugal casting process is modeled using finite element software (procast, version 2008), the residual stresses are estimated and compared with the experimental measurements. The experimental residual stress measurements were done using the hole drill method. Microstructure and hardness of the cast are also analyzed. The effect of pouring time, shake out time, mold preheat temperature, cooling media and mold rotational speed were studied | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aBi - metals | |
| 653 | 4 | _aCentrifugal casting | |
| 653 | 4 | _aModeling | |
| 700 | 0 |
_aChahinaz Abdelrahman Saleh , _eSupervisor |
|
| 700 | 0 |
_aRagaie Mohamed Rashad , _eSupervisor |
|
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aSamia _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c55494 _d55494 |
||