000			02983cam a2200349 a 4500
003			EG-GiCUC
005			20250223031447.0
008			160326s2013 ua dh f m 000 0 eng d
040			_aEG-GiCUC _beng _cEG-GiCUC
041	0		_aeng
049			_aDeposite
097			_aPh.D
099			_aCai01.09.09.Ph.D.2013.Sa.M
100	0		_aSarah Omar Abduljabar Alariqi
245	1	0	_aMarginal gap distance and fracture resistance of two conservative all-ceramic fixed partial denture designs / _cSarah Omar Abduljabar Alariqi ; Supervised Eman Mohamed Anwar , Elzahraa Abdulhameed Eldwakhly , Maha Ahmed Taymour
246	1	5	_aمسافة الفجوة الحافية ومقاومة الكسر لتصميمين محافظين من الأطقم الخزفية الجزئية المثبتة
260			_aCairo : _bSarah Omar Abduljabar Alariqi , _c2013
300			_a164 P. : _bcharts , facsimiles ; _c25cm
502			_aThesis (Ph.D.) - Cairo University - Faculty of Oral and Dental Medicine - Department of Prosthodontics
520			_aThe present study aimed to investigate the vertical marginal gap distance and fracture resistance of two conservative all-ceramic fixed partial denture (FPD) designs in comparison to conventional full coverage-retained fixed partial denture. Three models were created by mounting one cast premolar in an acrylic resin block in conjunction with one of the three cast molars with a 10 mm space between them which corresponded to the dimension of a missing first molar. Fifteen posterior full-contour zirconia-based all-ceramic FPDs were fabricated using CAD/CAM technique and divided into three groups of five samples each according to the type of retainer design:- Group (1): Inlay/inlay-retained FPDs with the inlay retainer on both the premolar and molar teeth. Group (2): Inlay/onlay-retained FPDs with a premolar inlay retainer and a molar onlay retainer. Group (3): Full coverage/full coverage-retained FPDs with full coverage retainers on both the premolar and molar teeth. For all FPDs, the vertical marginal gap distance was measured using scanning electron microscope at 400{u00D7} magnification. Each mounted chrome-cobalt dies were duplicated into five epoxy resin models for each tested FPD design. The fifteen FPDs were cemented on their respective epoxy resin models with self-adhesive self-cure resin cement. All samples were loaded and fracture loads (N) were measured at fracture with a computer controlled materials testing machine at a crosshead speed of 1.0 mm/min.
530			_aIssued also as CD
653		4	_aFull-contour zirconia
653		4	_aInlay-retained fixed partial denture
653		4	_aMarginal gap distance
700	0		_aElzahraa Abdul-Hameed Eldwakhly , _eSupervisor
700	0		_aEman Mohamed Anwar , _eSupervisor
700	0		_aMaha Ahmed Taymour , _eSupervisor
856			_uhttp://172.23.153.220/th.pdf
905			_aNazla _eRevisor
905			_aSoheir _eCataloger
942			_2ddc _cTH
999			_c55739 _d55739