| 000 | 02027cam a2200337 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223031740.0 | ||
| 008 | 170704s2016 ua h f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aPh.D | ||
| 099 | _aCai01.13.12.Ph.D.2016.Mo.E | ||
| 100 | 0 | _aMoustafa Ahmed Mohamed Sayed Abdelrahman | |
| 245 | 1 | 0 |
_aEffect of friction stir welding and processing conditions on the properties of aluminum alloy 6061 / _cMoustafa Ahmed Mohamed Sayed Abdelrahman ; Supervised M. R. Elkoussy , M. E. Abdelazim |
| 246 | 1 | 5 | _aتأثير ظروف اللحام و التصنيع بالتقليب الاحتكاكى على خواص سبيكة الألومنيوم 6061 |
| 260 |
_aCairo : _bMoustafa Ahmed Mohamed Sayed Abdelrahman , _c2016 |
||
| 300 |
_a84 P. : _bfacsimiles ; _c30cm |
||
| 502 | _aThesis (Ph.D.) - Cairo University - Faculty of Engineering - Department of Metallurgical Engineering | ||
| 520 | _aThe influence of heat input and cooling rate during friction stir welding of aluminum alloy 6061-T6 on affecting the response of the welded joints to post weld artificial aging (PWAA) was investigated. It is found that the ability of PWAA to increase the strength of the welded joints is increased with lowering the heat input and also with increasing the cooling rate during the welding process. The ability to improve the strength of the aluminum alloy 6061 by combining friction stir processing and artificial aging was also investigated. The result shows that the strength of the alloy can be increased to values higher than that of the AA6061-T6 by approximately 20% | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aArtificial aging | |
| 653 | 4 | _aCooling rate | |
| 653 | 4 | _aHeat input | |
| 700 | 0 |
_aMohamed Eazat Abdelazim , _eSupervisor |
|
| 700 | 0 |
_aMohamed Rafat Mahmoud Elkoussy , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aSamia _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c61437 _d61437 |
||