000			02019cam a2200349 a 4500
003			EG-GiCUC
005			20250223031844.0
008			171118s2017 ua dh f m 000 0 eng d
040			_aEG-GiCUC _beng _cEG-GiCUC
041	0		_aeng
049			_aDeposite
097			_aM.Sc
099			_aCai01.13.13.M.Sc.2017.Mu.P
100	0		_aMustafa Mubarak Semman
245	1	0	_aPrediction of defects in non-circular deep drawn parts using finite element analysis and response surface methodology / _cMustafa Mubarak Semman ; Supervised Abdalla S. Wifi , Mohamed H. Gadullah , Mostafa H. Shazly
246	1	5	_aالتنبؤ بعيوب عملية السحب العميق للأشكال الغير دائرية باستخدام طريقة العناصر المحددة وطريقة سطح الاستجابة
260			_aCairo : _bMustafa Mubarak Semman , _c2017
300			_a94 P. : _bcharts , facsimiles ; _c30cm
502			_aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Mechanical Design and Production
520			_aDeep drawing defects such as thinning and earing present challenges to sheet metal forming industry while designers tend to favor the usage of new materials and production processes. the present work introduces an integrated approach using design of experiment approach, FEA experimentation and response surface methodology (RSM) to develop linear regression equation that is capable of predicting earing and thinning defects in deep drawing of non-circular parts (rectangular and elliptical) and determine the optimum process parameters which lead to minimum defects
530			_aIssued also as CD
653		4	_aEaring
653		4	_aFinite element analysis
653		4	_aThinning
700	0		_aAbdalla S. Wifi , _eSupervisor
700	0		_aMohamed H. Gadullah , _eSupervisor
700	0		_aMostafa H. Shazly , _eSupervisor
856			_uhttp://172.23.153.220/th.pdf
905			_aNazla _eRevisor
905			_aShimaa _eCataloger
942			_2ddc _cTH
999			_c63550 _d63550