000			01988cam a2200325 a 4500
003			EG-GiCUC
008			180426s2017 ua o f m 000 0 eng d
040			_aEG-GiCUC _beng _cEG-GiCUC
041	0		_aeng
049			_aDeposite
097			_aM.Sc
099			_aCai01.13.13.M.Sc.2017.Mo.M
100	0		_aMohamed Mohamed Abdelnabi Abdelmageed
245	1	0	_aModeling and optimization of friction stir welding parameters for joining dissimilar aluminum alloys / _cMohamed Mohamed Abdelnabi Abdelmageed ; Supervised Tarek Abdelsadek Osman , Alaa Elmokadem , Abou Bakr Hamed Elshalakany
246	1	5	_aالنـمـذجة و الأمثلية لمتغيرات عملية اللحام الإحتكاكى التقليبى لوصل سبائك الألومنيوم المتباينة
260			_aCairo : _bMohamed Mohamed Abdelnabi Abdelmageed , _c2017
300			_a133 P. : _bphotographs ; _c30cm
502			_aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Mechanical Design and Production
520			_aThe aim of this work is to study the effect of process parameters on the mechanical properties of dissimilar joints between aluminum alloy 5454 and aluminum alloy 7075 produced by friction stir welding and to optimize these parameters by using taguchi method. Experimental work was carried out at different levels of process parameters (rotational speed; traverse speed; pin profile; ratio between shoulder diameter and pin diameter; tilt angle; plunge depth and base metal location). The maximum joint efficiency, compared to the strength of aluminum alloy 5454, is 85.3%
530			_aIssued also as CD
653		4	_aFriction stir welding
653		4	_aMechanical properties
653		4	_aTaguchi method
700	0		_aAbou Bakr Hamed Elshalakany , _eSupervisor
700	0		_aAlaa Elmokadem , _eSupervisor
700	0		_aTarek Abdelsadek Osman , _eSupervisor
905			_aNazla _eRevisor
905			_aSamia _eCataloger
942			_2ddc _cTH
999			_c65992 _d65992