| 000 | 02909cam a2200349 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223032229.0 | ||
| 008 | 190319s2018 ua dh f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aPh.D | ||
| 099 | _aCai01.24.05.Ph.D.2018.Sh.S | ||
| 100 | 0 | _aShaimaa Mohamed Sayed Elabed | |
| 245 | 1 | 0 |
_aStudy the effect of some nano additives on the properties of lubricating oil and its photostability and thermal stability thesis / _cShaimaa Mohamed Sayed Elabed ; Supervised Alsayed AbdElmajied Alshirbini , Mona Bakr Mohamed , Yasser Attiaa |
| 246 | 1 | 5 | _aدراسة تأثير بعض الإضافات النانويه علي خواص زيوت التشحيم و على ثباتها الضوء الحرارى |
| 260 |
_aCairo : _bShaimaa Mohamed Sayed Elabed , _c2018 |
||
| 300 |
_a145 P. : _bcharts , facsimiles ; _c25cm |
||
| 502 | _aThesis (Ph.D.) - Cairo University - National Institute of Laser Enhanced Sciences - Department of Lasser Application in Environmental Metrology Photochemistry and Photobiology and Agriculture | ||
| 520 | _aLubrication is the process or technique employed to reduce wear of one or both surfaces in close proximity, moving relative to each other, by interposing a substance called lubricant between the surface to carry or to help carry the load (pressure generated) between the opposing surfaces. Typically lubricants contain 90% base oil (most often petroleum fractions, called mineral oils) and less than 10% additives, The functions of additives are improve oil viscosity index, increase oil oxidation stability, prevent lacquers , prevent wear, reduce fraction, prevent scuffing, depress oil pour point, prevent rust formation, prevent foaming. Nanoparticles and materials in nanoscale have a great attention in the last two decades due to their unique and special properties which cannot provide by bulk materials, they have several applications in many fields and recently, nanoparticles have been used in lubricant as additives to improve its physical and tribological properties rather than pure lubricant, for example; Ehsan-o-llah Ettefaghi studied engine oil properties containing copper oxide nanoparticles as a nanoadditive, Xianbing Ji used cubic CaCO3 nanoparticles as a nanoaditives, Yue Gu, applied surface modified titanium dioxide (TiO2) nanoparticles, Z.S. Hu., prepared amorphous lanthanum borate Nanoparticle as a nanoadditives, and many other studies | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aAntiwear ability | |
| 653 | 4 | _aNanoparticles | |
| 653 | 4 | _aThermal stability | |
| 700 | 0 |
_aAlsayed AbdElmajied Alshirbini , _eSupervisor |
|
| 700 | 0 |
_aMona Bakr Mohamed , _eSupervisor |
|
| 700 | 0 |
_aYasser Attiaa , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aSamia _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c70929 _d70929 |
||