| 000 | 02033cam a2200337 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223032236.0 | ||
| 008 | 190402s2018 ua dh f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.12.M.Sc.2018.Mo.E | ||
| 100 | 0 | _aMohamed Elhussien Eldessouky Eldessouky | |
| 245 | 1 | 0 |
_aEvaluation of multi-phase mechanistic models for vertical and deviated wells / _cMohamed Elhussien Eldessouky Eldessouky ; Supervised Ahmed Hamdy Elbanbi , Elsayed Ahmed Altayeb |
| 246 | 1 | 5 | _aتقييم النماذج الميكانيكية للتدفق متعدد الاطوار للآبار العمودية و المائلة |
| 260 |
_aCairo : _bMohamed Elhussien Eldessouky Eldessouky , _c2018 |
||
| 300 |
_a122 P. : _bcharts , facsimiles ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Metallurgical Engineering | ||
| 520 | _aDevelopment of Models to accurately calculate pressure drop along wells and pipelines has always been a challenge to scientists and engineers. This thesis presents an evaluation of the most commonly used Mechanistic Models.Selected Mechanistic Models were first programmed using C# programming language, then, a comprehensive evaluation of these models was done using a large set of test points (1,418 points). The results of the programmed models were further analyzed; where three new methods were developed based on this analysis. All the programmed models/methods were tested against new field data (132 points) and compared with commonly used models in oil field | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aMechanistic Models | |
| 653 | 4 | _aMulti-phase flow | |
| 653 | 4 | _aPressure drop calculations | |
| 700 | 0 |
_aAhmed Hamdy Elbanbi , _eSupervisor |
|
| 700 | 0 |
_aElsayed Ahmed Altayeb , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aShimaa _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c71169 _d71169 |
||