| 000 | 02047cam a2200337 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223032319.0 | ||
| 008 | 190624s2018 ua dh f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.08.M.Sc.2018.He.M | ||
| 100 | 0 | _aHesham Mohammed Hussien | |
| 245 | 1 | 0 |
_aMode selection and resource allocation in D2D communication underlay cellular networks / _cHesham Mohammed Hussien ; Supervised Mohammed Hamed Nafie , Ahmed Hesham Mehana |
| 246 | 1 | 5 | _aاختيار الوضع و تخصيص الموارد فى اتصالات الجهاز بالجهاز داخل شبكات الاتصالات الخلوية |
| 260 |
_aCairo : _bHesham Mohammed Hussien , _c2018 |
||
| 300 |
_a40 P. : _bcharts , facsimiles ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Electronics and Communications | ||
| 520 | _aDue to the higher demand for the data rates and massive growing of data and broad band services, Device to device (D2D) communication is considered as an essential part in 5G networks. D2D communication enables the networks to have high data rates, low power consumption and low latency. D2D communication is allowing direct communication between the transmitter and receiver without relaying the data through BS. Four modes of operation are available in D2D communication (i.e Reuse, Dedicated, Cellular and Silent mode). In this work we present a mode selection algorithm based on the relative distances between the node to achieve minimum signal to noise ratio for both Cellular and D2D users | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aDevice to Device Communication | |
| 653 | 4 | _aMode Selection | |
| 653 | 4 | _aStochastic Geometry | |
| 700 | 0 |
_aAhmed Hesham Mehana , _eSupervisor |
|
| 700 | 0 |
_aMohammed Hamed Nafie , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aShimaa _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c72558 _d72558 |
||