000			02281cam a2200337 a 4500
003			EG-GiCUC
005			20250223032620.0
008			201026s2020 ua dh f m 000 0 eng d
040			_aEG-GiCUC _beng _cEG-GiCUC
041	0		_aeng
049			_aDeposite
097			_aM.Sc
099			_aCai01.13.12.M.Sc.2020.Ab.E
100	0		_aAbdulrahman Mohamed Bakheet Abdulwarith
245	1	0	_aEnhancement of water-based drilling fluid rheology and tribology using different nanoparticles through expermenital and simulation studies / _cAbdulrahman Mohamed Bakheet Abdulwarith ; Supervised Abdelsattar Abdelhamid Dahab , Eissa Mohamed Shokir
246	1	5	_aتحسين خواص التدفق والاحتكاك لمائع الحفر مائى القاعدة عن طريق استخدام انواع مختلفة من الجسيمات النانوية من خلال الدراسات المعملية والمحاكاة
260			_aCairo : _bAbdulrahman Mohamed Bakheet Abdulwarith , _c2020
300			_a92 P. : _bcharts , facimiles ; _c30cm
502			_aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Metallurgical Engineering
520			_aThe purpose of this thesis is to study the effect of nanoparticles in the laboratory on the properties of WBM which was formulated with Bentonite, KCl and XC polymer. The effect of both MWCNT and SiO₂ on base fluid was studied.The first part of the study is carried out on the rheological properties and friction factor of WBM by using the MCR rheometer and tribometer,in addition to pH and filtration measurements. The second part of the study is to select the best fluids based on the minimum friction factor which were furtherly evaluated through simulation performance.The performed simulation studies were on rheological modelling, torque and drag along with well hydraulics and hole cleaning
530			_aIssued also as CD
653		4	_aDrilling fluids
653		4	_aMultiwall carbon nanotubes (MWCNT) nanoparticles
653		4	_aSiO₂ Nanoparticles
700	0		_aAbdelsattar Abdelhamid Dahab , _eSupervisor
700	0		_aEissa Mohamed Shokir, _eSupervisor
856			_uhttp://172.23.153.220/th.pdf
905			_aNazla _eRevisor
905			_aShimaa _eCataloger
942			_2ddc _cTH
999			_c78460 _d78460