000 | 01780cam a2200313 a 4500 | ||
---|---|---|---|
003 | EG-GiCUC | ||
008 | 210130s2020 ua dh f m 000 0 eng d | ||
040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
041 | 0 | _aeng | |
049 | _aDeposite | ||
097 | _aM.Sc | ||
099 | _aCai01.13.04.M.Sc.2020.Ah.M | ||
100 | 0 | _aAhmed Mamdouh Azab | |
245 | 1 | 0 |
_aManufacturing of composite materials used for camouflaging and concealment for UAV (Stealth) / _cAhmed Mamdouh Azab ; Supervised Nabil M. Abdelmonem , Hesham Tantawy |
246 | 1 | 5 | _aصناعة مواد مركبة تستخدم فى الاخفاء و التمويه للطائرات بدون طيار |
260 |
_aCairo : _bAhmed Mamdouh Azab , _c2020 |
||
300 |
_a66 P. : _bcharts , facimiles ; _c30cm |
||
502 | _aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Chemical Engineering | ||
520 | _aComposite materials used for camouflaging and concealment for unmanned aerial vehicles UAV from radar waves are prepared by using Graphene / polyethylene matrix. Graphene used in the matrix are in the form of chemically reduced graphene oxide RGO or thermally reduced graphene intercalated GI-Th. Characterization are done for both pure graphite G, RGO and GI-Th. Composite polymer matrix is prepared utilizing 0.7 g sample of 10, 20 and 30% mass loading of G, RGO and GI-Th. EM measurements are done by using Network Analyzer device under the frequency range (8-12)GHz to obtain RL and TL of the composites | ||
530 | _aIssued also as CD | ||
653 | 4 | _aComposites | |
653 | 4 | _aPreparation | |
653 | 4 | _aStealth | |
700 | 0 |
_aHesham Tantawy , _eSupervisor |
|
700 | 0 |
_aNabil M. Abdelmonem , _eSupervisor |
|
905 |
_aNazla _eRevisor |
||
905 |
_aShimaa _eCataloger |
||
942 |
_2ddc _cTH |
||
999 |
_c79748 _d79748 |