| 000 | 01835cam a2200325 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223032716.0 | ||
| 008 | 210315s2020 ua dh f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.01.M.Sc.2020.Ah.E | ||
| 100 | 0 | _aAhmad Sami Ahmad Ismail Albarawy | |
| 245 | 1 | 0 |
_aEnhanced UAV conceptual sizing method for optimum design parameters selection / _cAhmad Sami Ahmad Ismail Albarawy ; Supervised Mohamed Nader Aboulfotouh |
| 246 | 1 | 5 | _aالطريقة المحسنة لاختيار المعاملات المثلى للتصميم التصورى للطائرات بدون طيار |
| 260 |
_aCairo : _bAhmad Sami Ahmad Ismail Albarawy , _c2020 |
||
| 300 |
_a196 P. : _bcharts , facsimiles ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Aerospace Engineering | ||
| 520 | _aThis work aims at developing an enhanced conceptual design technique that uses available data to improve design parameters estimation and design point selection.The weight estimation is refined to get betterestimate for take-off weight.The performance matching plot generation is based on the steady performance equations instead of empirical relations from regulations.Optimized performance criteria plots are added to the matching graph to help on the selection of the design. Finally,the wing and tail initial geometry are estimated using some guidelines for selecting the design parameters | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aAircraft Design | |
| 653 | 4 | _aSizing | |
| 653 | 4 | _aUAV | |
| 700 | 0 |
_aMohamed Nader Aboulfotouh , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aShimaa _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c80246 _d80246 |
||