| 000 | 01874cam a2200337 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223032727.0 | ||
| 008 | 210411s2020 ua dh f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.13.M.Sc.2020.Ay.C | ||
| 100 | 0 | _aAya Ahmed Ibrahim Mohamed | |
| 245 | 1 | 0 |
_aCharacterization of aluminum nickel composite reinforced by graphene and silicon carbide / _cAya Ahmed Ibrahim Mohamed ; Supervised Abdul Halim Elhabak , Omayma Elkady |
| 246 | 1 | 5 | _aتوصيف المواد المركبة من الألومنيوم و النيكل المدعم بالجرافين و السيليكون كربيد |
| 260 |
_aCairo : _bAya Ahmed Ibrahim Mohamed , _c2020 |
||
| 300 |
_a57 P. : _bcharts , facimiles ; _c25cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Mechanical Design and Production Engineering | ||
| 520 | _aThis study presents Al-Ni composite reinforced by GNPs and SiC with different volume fraction by powder metallurgy technique. Besides, the obtained composites were investigated with different tests such as microstructure, relative density, hardness, wear, compression, and coefficient of thermal expansion tests. The results showed that by addition of SiC and increasing its percentage, the physical and mechanical properties are increased by increasing SiC up to 15 wt% then deceased. Also XRD showed the formation of new phases formed Al3Ni, Ni₃C | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aAl/Ni/Sic/GNPs | |
| 653 | 4 | _aHardness | |
| 653 | 4 | _aPowder metallurgy | |
| 700 | 0 |
_aAbdul Halim Elhabak , _eSupervisor |
|
| 700 | 0 |
_aOmayma Elkady , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aShimaa _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c80615 _d80615 |
||