000			02244cam a2200349 a 4500
003			EG-GiCUC
005			20250223032812.0
008			210907s2020 ua dh f m 000 0 eng d
040			_aEG-GiCUC _beng _cEG-GiCUC
041	0		_aeng
049			_aDeposite
097			_aPh.D
099			_aCai01.11.25.Ph.D.2020.Ha.F
100	0		_aHaitham Abdelfatah Abdelhamed Ismail
245	1	0	_aFixed bearing versus mobile bearing total knee replacement / _cHaitham Abdelfatah Abdelhamed Ismail ; Supervised Nasser Osman Elkoussy , Amr Wael Farag , Molham Mahmood
246	1	5	_aالمقارنة بين التحميل الثابت والتحميل المتحرك فى حالة استبدال مفصل الركبة الكامل
260			_aCairo : _bHaitham Abdelfatah Abdelhamed Ismail , _c2020
300			_a172 P. : _bcharts , facsimiles ; _c25cm
502			_aThesis (Ph.D.) - Cairo University - Faculty of Medicine - Department of Orthopedic Surgery
520			_aThe concept of a mobile-bearing (MB) TKA is an attempt to reach a satisfactory balance by combining both design approaches: conforming tibio-femoral articular surfaces to decrease bearing contact stresses combined with bearing mobility to reduce stresses transmitted to the bone- cement interfaces. Thus, MB designs would not be as rotationally constraining as fixed bearing (FB) conforming implants and would provide increased motion clinically and improved knee kinematics of both femoro- tibial and patello-femoral articulations. In addition, maintenance of articulation congruity throughout the range of motion would lead to lower wear rates and therefore improved durability (3). The objective of this prospective randomized controlled trial (RCT) was to prospectively compare the short-term functional outcomes of FB and MB
530			_aIssued also as CD
653		4	_aAnteroposterior (AP)
653		4	_aBearing Mobile bearing total knee replacement
653		4	_aMediolaterals (ML)
700	0		_aAmr Wael Farag , _eSupervisor
700	0		_aMolham Mahmood , _eSupervisor
700	0		_aNasser Osman Elkoussy , _eSupervisor
856			_uhttp://172.23.153.220/th.pdf
905			_aNazla _eRevisor
905			_aShimaa _eCataloger
942			_2ddc _cTH
999			_c82024 _d82024