Marginal adaptation of CAD/CAM Occlusal Veneers fabricated from different materials with two different thicknesses : invitro study /
Shaimaa Salah Abbass,
Marginal adaptation of CAD/CAM Occlusal Veneers fabricated from different materials with two different thicknesses : invitro study / التكيف الحافي لقشرة الإطباق كاد كم المصنعة من مواد مختلفه بسماكتين مختلفتين : دراسة مختبريه / by Shaimaa Salah Abbass ; Supervisors Prof. Dr. Rabab Mohamed Ibrahim, Dr. Hanaa Sayed Nassar. - 127 pages : illustrations ; 25 cm. + CD.
Thesis (M.Sc)-Cairo University, 2023.
Bibliography: pages 112-121.
Purpose: The purpose of this study was to evaluate and compare the fracture resistance of occlusal veneers constructed from lithium disilicate (IPS e-max), Zirconia reinforced lithium silicate (Celtra Duo) and Resin matrix ceramics (Shofu) materials with two restoration thicknesses.
Materials and Methods: 42 Human 2nd mandibular molars were used which were caries free, with no previous restoration and with no root canal treatment. Teeth were fixed into epoxy resin transparent blocks. Randomization and Biogeneric copy were done for the samples. Teeth preparation for occlusal veneer was done with 0.5 mm chamfer finish line. Samples were randomized equally into 3 groups according to the material: group 1: (IPS e-max CAD), group 2: (Celtra Duo) and group 3: (Shofu Hc). Samples were further subdivided into 2 groups of thickness: subgroup (A) conventional 1.5mm and subroup (B) thin 1mm. Scanning was done by Omni-cam scanner. Designing was done by Cerec 3D software version 4.5. CEREC MCXL 4-Axis machine was used for milling of occlusal veneers. Each surface of the occlusal veneer restoration was subjected to stereomicroscope for testing marginal adaptation.
Results: the mean marginal gap of tested samples for conventional thickness of IPS, E-max Cad group (12.74 ± 3.8μm), and for thin thickness of IPS E.max
CAD group (14.16 ±4.28μm), while for conventional thickness of Celtra Duo group (7.69 ± 4.24) μm), and for thin Celtra Duo group (9.5 ± 3.28 μm), For conventional thickness of Shofu group (12.02 ±3.2μm) and for thin Shofu group (13.9 ±3.6μm).
Conclusion: Occlusal veneers could potentially represent a conservative treatment option for restoration of non-carious tooth lesions. Both conventional and thin occlusal veneer thickness of the three tested materials presented marginal adaptation mean values within the clinical accepted range. قشور الإطباق هي عبارة عن إعداد تغطية جزئية للإطباق الخلفي الرقيق، وهو ما يشار إليه في حالات فقدان الأسنان غيرالنخرية لسطح الإطباق أو في الحالات الترميمية السريرية الأخرى التي تحتاج إلى زيادة البعد الرأسي. علاوة على ذلك، توفرقشور الإطباق تحضيرًا أكثر تحفظً ا لبنية الأسنان. هدفت هذه الدراسة إلى تقييم ومقارنة التكيف الهامشي للقشرة الإطباقية المصنوعة من ثنائي سيليكات الليثيوم ) IPS e-max( وسيليكات الليثيوم المقوى بالزركونيا) Celtra Duo( ومواد سيراميكمصفوفة الراتنج) Shofu Hc( بسماكتين مختلفتين للترميم .
تم استخدام 42 ضرسًا فكيًا سفليًا بشريًا خاليًا من التسوس، وأسطح إطباقية سليمة، دون أي ترميم سابق. تم تثبيت الأسنان في بلوكات اسطوانيه شفافة من راتنجات الايبوكسي. تم إجراء التوزيع العشوائي والنسخة الحيوية ومؤشر الزبدة للعينات قبل التحضير. تم اختيارهم بصورة عشوائية العينات بالتساوي إلى 3 مجموعات من المواد؛ المجموعة الأولى: ) IPS e-max CAD(، المجموعة الثانية: )Celtra Duo(، المجموعة الثالثة: )Shofu Hc(. تم تقسيم العينات أيضًا إلى مجموعتين فرعيتين
وفقًا لسمك قشره الإطباق التعويضيه إلى المجموعة الفرعية) a( التقليدية 1.5 مم والمجموعة الفرعية) b( الرفيعة 1 مم. تم إعدادالأسنان لقشرة الإطباق باستخدام خط تشطيب يبلغ 0.5 مم. تم إجراء المسح بواسطة الماسح الضوئيOmnicam . تم التصميمبواسطة برنامج Cerec 3D الإصدار 4.5. تم استخدام آلة CEREC MCXL ذات 4 محاور لخرط قشور الإطباق. وذلك بعد
تمام تصنيعها داخل الفرن وصقلها . كما تمت معالجه كل من سطح الاطباق للسن والسطح الدالخلي لقشره الاطباق التعويضيه ثم لزقها بالاسمنت الراتنجي ثنائي البلمره ثم حفظ العينات لمده 48 ساعه وبعدها تم إخضاع كل سطح من ترميم القشرة الإطباقية التعويضيه للفحص والقياس بواسطه مجهرالستريوميكروسكوب لتقييم التطابق الهامشي .
أظهرت نتائج الدراسة الحالية أن متوسط الفجوة الهامشية للعينات التي تم اختبارها للسمك التقليدي لمجموعة IPS ومجموعةE-max Cad (12.74 ± 4.2μm) وللسمك الرقيق لمجموعةIPS E.max CAD (14.16 ±4.28μm) ، بينما
بالنسبة للسمك التقليدي لمجموعةCeltra Duo )7.93 ± 2.84 ميكرومتر(، ولمجموعةCeltra Duo الرقيقة) 9.2 ±3.2 ميكرومتر(، للسمك التقليدي من مجموعة Shofu (8.3 ± 20.12 ميكرومتر( ومجموعة Shofu الرفيعة) 13.9 ± 3.6
μm(.وفقا للنتائج، لم يكن هناك فرق كبير بين التكيف الحدي لسمك القشرة الإطباقية التقليدية والرقيقة) P <0.5( وكانCeltra Duo أعلى قيم متوسط التكيف الحدي من المجموعات الأخرى. ومع ذلك، فإن الفجوة الهامشية للمواد الثلاثة التي تم اختبارها كانت ضمن نطاق المقبولية الاكلينيكيه.
Text in English and abstract in Arabic & English.
Fixed prosthodontics
Marginal adaptation Occlusal veneers Ceramic materials Conservative restorations non-carious lesions
617.69
Marginal adaptation of CAD/CAM Occlusal Veneers fabricated from different materials with two different thicknesses : invitro study / التكيف الحافي لقشرة الإطباق كاد كم المصنعة من مواد مختلفه بسماكتين مختلفتين : دراسة مختبريه / by Shaimaa Salah Abbass ; Supervisors Prof. Dr. Rabab Mohamed Ibrahim, Dr. Hanaa Sayed Nassar. - 127 pages : illustrations ; 25 cm. + CD.
Thesis (M.Sc)-Cairo University, 2023.
Bibliography: pages 112-121.
Purpose: The purpose of this study was to evaluate and compare the fracture resistance of occlusal veneers constructed from lithium disilicate (IPS e-max), Zirconia reinforced lithium silicate (Celtra Duo) and Resin matrix ceramics (Shofu) materials with two restoration thicknesses.
Materials and Methods: 42 Human 2nd mandibular molars were used which were caries free, with no previous restoration and with no root canal treatment. Teeth were fixed into epoxy resin transparent blocks. Randomization and Biogeneric copy were done for the samples. Teeth preparation for occlusal veneer was done with 0.5 mm chamfer finish line. Samples were randomized equally into 3 groups according to the material: group 1: (IPS e-max CAD), group 2: (Celtra Duo) and group 3: (Shofu Hc). Samples were further subdivided into 2 groups of thickness: subgroup (A) conventional 1.5mm and subroup (B) thin 1mm. Scanning was done by Omni-cam scanner. Designing was done by Cerec 3D software version 4.5. CEREC MCXL 4-Axis machine was used for milling of occlusal veneers. Each surface of the occlusal veneer restoration was subjected to stereomicroscope for testing marginal adaptation.
Results: the mean marginal gap of tested samples for conventional thickness of IPS, E-max Cad group (12.74 ± 3.8μm), and for thin thickness of IPS E.max
CAD group (14.16 ±4.28μm), while for conventional thickness of Celtra Duo group (7.69 ± 4.24) μm), and for thin Celtra Duo group (9.5 ± 3.28 μm), For conventional thickness of Shofu group (12.02 ±3.2μm) and for thin Shofu group (13.9 ±3.6μm).
Conclusion: Occlusal veneers could potentially represent a conservative treatment option for restoration of non-carious tooth lesions. Both conventional and thin occlusal veneer thickness of the three tested materials presented marginal adaptation mean values within the clinical accepted range. قشور الإطباق هي عبارة عن إعداد تغطية جزئية للإطباق الخلفي الرقيق، وهو ما يشار إليه في حالات فقدان الأسنان غيرالنخرية لسطح الإطباق أو في الحالات الترميمية السريرية الأخرى التي تحتاج إلى زيادة البعد الرأسي. علاوة على ذلك، توفرقشور الإطباق تحضيرًا أكثر تحفظً ا لبنية الأسنان. هدفت هذه الدراسة إلى تقييم ومقارنة التكيف الهامشي للقشرة الإطباقية المصنوعة من ثنائي سيليكات الليثيوم ) IPS e-max( وسيليكات الليثيوم المقوى بالزركونيا) Celtra Duo( ومواد سيراميكمصفوفة الراتنج) Shofu Hc( بسماكتين مختلفتين للترميم .
تم استخدام 42 ضرسًا فكيًا سفليًا بشريًا خاليًا من التسوس، وأسطح إطباقية سليمة، دون أي ترميم سابق. تم تثبيت الأسنان في بلوكات اسطوانيه شفافة من راتنجات الايبوكسي. تم إجراء التوزيع العشوائي والنسخة الحيوية ومؤشر الزبدة للعينات قبل التحضير. تم اختيارهم بصورة عشوائية العينات بالتساوي إلى 3 مجموعات من المواد؛ المجموعة الأولى: ) IPS e-max CAD(، المجموعة الثانية: )Celtra Duo(، المجموعة الثالثة: )Shofu Hc(. تم تقسيم العينات أيضًا إلى مجموعتين فرعيتين
وفقًا لسمك قشره الإطباق التعويضيه إلى المجموعة الفرعية) a( التقليدية 1.5 مم والمجموعة الفرعية) b( الرفيعة 1 مم. تم إعدادالأسنان لقشرة الإطباق باستخدام خط تشطيب يبلغ 0.5 مم. تم إجراء المسح بواسطة الماسح الضوئيOmnicam . تم التصميمبواسطة برنامج Cerec 3D الإصدار 4.5. تم استخدام آلة CEREC MCXL ذات 4 محاور لخرط قشور الإطباق. وذلك بعد
تمام تصنيعها داخل الفرن وصقلها . كما تمت معالجه كل من سطح الاطباق للسن والسطح الدالخلي لقشره الاطباق التعويضيه ثم لزقها بالاسمنت الراتنجي ثنائي البلمره ثم حفظ العينات لمده 48 ساعه وبعدها تم إخضاع كل سطح من ترميم القشرة الإطباقية التعويضيه للفحص والقياس بواسطه مجهرالستريوميكروسكوب لتقييم التطابق الهامشي .
أظهرت نتائج الدراسة الحالية أن متوسط الفجوة الهامشية للعينات التي تم اختبارها للسمك التقليدي لمجموعة IPS ومجموعةE-max Cad (12.74 ± 4.2μm) وللسمك الرقيق لمجموعةIPS E.max CAD (14.16 ±4.28μm) ، بينما
بالنسبة للسمك التقليدي لمجموعةCeltra Duo )7.93 ± 2.84 ميكرومتر(، ولمجموعةCeltra Duo الرقيقة) 9.2 ±3.2 ميكرومتر(، للسمك التقليدي من مجموعة Shofu (8.3 ± 20.12 ميكرومتر( ومجموعة Shofu الرفيعة) 13.9 ± 3.6
μm(.وفقا للنتائج، لم يكن هناك فرق كبير بين التكيف الحدي لسمك القشرة الإطباقية التقليدية والرقيقة) P <0.5( وكانCeltra Duo أعلى قيم متوسط التكيف الحدي من المجموعات الأخرى. ومع ذلك، فإن الفجوة الهامشية للمواد الثلاثة التي تم اختبارها كانت ضمن نطاق المقبولية الاكلينيكيه.
Text in English and abstract in Arabic & English.
Fixed prosthodontics
Marginal adaptation Occlusal veneers Ceramic materials Conservative restorations non-carious lesions
617.69