Assessment of translucency and color stability of pressed versus milled zirconia- reinforced lithium silicate glass ceramics : an in vitro study / by Yara Adel Abdelrahman Mohamed ; Supervisors Prof. Badawy Abo EL Mahasen Badawy, Dr. Abdelrahman Soliman Badran.
Material type:
- text
- Unmediated
- volume
- تقييم الشفافيه وثبات اللون لماده الليثيوم سيليكيت المقواه بالزركونيا بتقنية الضغط الحراري مقابل تقنية الخرط : دراسة في المختبر [Added title page title]
- 617.69
- Issues also as CD.
Item type | Current library | Home library | Call number | Status | Barcode | |
---|---|---|---|---|---|---|
![]() |
قاعة الرسائل الجامعية - الدور الاول | المكتبة المركزبة الجديدة - جامعة القاهرة | Cai01.09.09.M.Sc.2024.Ya.A (Browse shelf(Opens below)) | Not for loan | 01010110091188000 |
Browsing المكتبة المركزبة الجديدة - جامعة القاهرة shelves Close shelf browser (Hides shelf browser)
Thesis (M.Sc.)-Cairo University, 2024.
Bibliography: pages 74-84.
Aim: This study evaluated the effect of fabrication technique on the Translucency and color stability of zirconia-reinforced lithium silicate glass ceramics.
Methodology: A total of Twenty -four ceramic plates (2 mm thickness) were fabricated from heat-pressed and milled zirconia-reinforced lithium silicate glass-ceramic (ZLS). all samples were divided into two groups (n=12) group 1: from heat-pressed zirconia reinforced lithium silicates ceramic (Vita Ambria) Ingots were lab processed following the manufacturer’s instructions and group 2: from milled zirconia-reinforced lithium silicate glass-ceramic (Vita suprinity) were obtained by sectioning CAD/CAM blocks with diamond saw (IsoMet 4000) under water cooling. Color and translucency parameter (TP) were measured according to CIELAB color space using spectrophotometer before and after thermocycling for 5000 cycles in a thermocycling paths with 50C and 550C Changes in color (ΔE) and TP (ΔTP) were calculated.
Results: Using an independent t-test, a comparison between them was made, and it was found that regarding ΔTP Group 1 (0.8± 0.22) was significantly lower than group 2 (1.27 ± 0.29) and regarding ΔE Group 1 (1.99 ± 0.15) was significantly lower than Group 2 (2.82 ± 0.16) with (0.83 ± 0.06) difference as P=0.0001.
Conclusion:
Thermocycling significantly affects both translucency and color stability of the tested zirconia-reinforced lithium silicate (ZLS)ceramics. Milled ZLS (Vita Suprinity) significantly less change in translucency after thermocycling compared to the heat-pressed ZLS (Vita Ambria) while Vita Ambria exhibited surprisingly better color stability after thermocycling.
كان الهدف من هذه الدراسة المخبرية هو تقييم تأثير تقنية التصنيع على الشفافية وثبات اللون لماده سيليكات اللثيوم المقواه بالزركونيا .
تم اعداد أربعة وعشرون لوحًا خزفيًا (سمك 2 مم) من ماده الليثيوم سيليكيت المقواه بالزركونيا المصنعه بالضغط الحراري والخرط تم تقسيم جميع العينات إلى مجموعتين (العدد = 12).
المجموعة 1: من سيراميك الليثيوم سيليكيت المقوى بالزركونيا المضغوط بالحرارة( فيتا امبريا) وتمت معالجة السبائك معمليًا وفقًا لتعليمات الشركة المصنعة والمجموعه 2:من سيراميك الليثيوم سيليكيت المقوى بالزركونيا المخروط (فيتا سوبرينيتي( عن طريق تقسيم كتل السيراميك بمنشار ماسي تحت تبريد الماء .تم قياس اللون والشفافيه باستخدام مقياس الطيف الضوئي قبل وبعد التدوير الحراري لمده 5000 دوره في مسارات التدوير الحراري مع 5 درجه مؤيه و55 درجه مؤيه وتم حساب التغيرات ف اللون والشفافيه.
اظهرت نتائج هذه الدراسه انه تم اجراء مقارنه بينهما وتبين ان مجموعه2 اقل ف تغيرات الشفافيه من مجموعه 1 بينما مجموعه 1 اقل ف تغيرات اللون من مجموعه. 2
ضمن حدود هذه الدراسه تم التوصل الى ان التدوير الحراري يؤثر بشكل كبير على كل من الشفافيه وثبات اللون لسيراميك الليثيوم سيليكيت المقوى بالزركونيا الذي تم اختباره وان سيراميك الليثيوم سيليكيت المقوى بالزركونيا المخروط (فيتا سوبرينيتي ) تغير اقل بكثير في الشفافيه بعد التدوير الحراري مقارنه بسيراميك الليثيوم سيليكيت المقوى بالزركونيا المصنع بالضغط الحراري الذي اظهر ثبات لون افضل بعد التدوير الحراري.
Issues also as CD.
Text in English and abstract in Arabic & English.
There are no comments on this title.