TY - BOOK AU - David Sami Abbas Tawfik, AU - Mohammad A. Nada AU - Mohamed Farouk Abdallah AU - Amr Ahmed Naguib TI - Peri-implant stress distribution in maxillary all-on-4 prostheses fabricated on multi-unit angled abutments with cobalt chromium framework versus those with titanium frame: A 3D Finite Element Analysis / U1 - 617.69 PY - 2024/// KW - Oral Implant KW - qrmak KW - Bone-implant contact KW - Finite Element Analysis KW - Abutment angulation KW - Framework Design KW - Multi unit abutment N1 - Thesis (M.Sc)-Cairo University, 2024; Bibliography: pages 81-100; Issues also as CD N2 - Aim: To evaluate peri-implant stresses generated using finite element analysis for cobalt chromium and titanium frameworks for a maxillary all on four prostheses. Material and methods: Three-dimensional finite element models of an edentulous maxilla restored with a hybrid fixed prosthesis supported by 4 implants were reconstructed to carry out this analysis. The anterior implants were placed vertically and bilaterally in the lateral-canine area, whereas the posterior implants were placed with a 17-degree distal angulation at the second premolar area. Multi-unit abutments were used for all implants. A framework of the first model made of cobalt chromium was designed, while for the second model a Titanium framework was planned. Results: The Von Mises stress, Maximum stress and directional deformation were assessed in the peri-implant bone area, both cobalt chromium and the Titanium frameworks showed very similar Von Mises stresses on the screw retained prosthesis, to the underlying bone and to the installed implants Conclusion: The use of either cobalt chromium or Titanium with an all on four prosthesis for the edentulous maxilla is considered to be a reliable treatment option; قيمت هذه الدراسة الجهود حول الزرعات المتولدة باستخدام تحليل العناصر المحدودة لهيكل الكوبالت كروميوم والتيتانيوم للفك العلوي في تتعويض الكل على اربعة. تم إجراء الدراسة باستخدام نموذج العناصر المحدودة ثلاثية الأبعاد في الفك العلوي بعديمو الاسنان تم ترميمه باستخدام طرف تعويضي مدعوم بأربع غرسات تم إعادة بناءها لإجراء هذا التحليل تم وضع الغرسات الأمامية عموديًا في الناحيتين ما بين القاطع الجانبي والناب في حين تم وضع الغرسات الخلفية بزاوية 17 درجة بعيدة في منطقة الضاحك الثانية تم استخدام دعامات متعددة الوحدات لجميع عمليات الزرع تم تصميم إطار النموذج الأول المصنوع من التيتانيوم بينما النسبة للنموذج الثاني ، تم التخطيط لإطار من الكوبالت كروميوم وتظهر نتائجنا أنه تم تقييم إجهاد فون ميزس والضغط الأقصى والتشوه الاتجاهي في منطقة العظام المحيطة بالزرع تظهر النتائج التي توصلنا إليها أنه تم تقييم إجهاد فون ميزس والحد الأقصى من الإجهاد والتشوه الاتجاهي في منطقة العظام المحيطة بالزرع، تم تقييم إجهاد فون ميزس والإجهاد الأقصى والتشوه الاتجاهي في منطقة العظام المحيطة بالزرعة، وأظهرت التيتانيوم عن الكروم الكوبالت أداء افضل على الإطار والطرف الاصطناعي المحتفظ بالمسمار، إلى العظام والزرعات المثبتة ER -