Preparation, development and assessment of polysulfone based hollow fiber membranes for hemodialysis /
تحضير وتطوير وتقييم أغشية الألياف المجوفة من البولي سلفون ومشتقاته للتطبيق في الاستصفاء الدموي
by Aya Naguib Mohamed Abd El-Ghany ; Supervisors Prof. Dr. Mahmoud Abdel Hakim El-Rifai, Prof. Dr. Reem Sayed Ettouney, Prof. Dr. Shadia Ragheb Tewfik, Prof. Dr. Heba Ahmed Hani.
- 94 pages : illustrations ; 30 cm. + CD.
Thesis (Ph.D)-Cairo University, 2025.
Bibliography: pages 69-85
This thesis addresses the preparation and testing of hollow fiber polysulfone membranes to be used in hemodialysis devices. Initially the hollow fibers were prepared by dry-wet spinning technique, followed by applying different methods for chemical surface treatment using different oxidation solutions and microwave surface treatment of the membranes. The effect of these treatments on the properties and performance of the membrane in terms of permeability to pure water and screening coefficients for urea and creatinine was studied. The results showed that treatment with hydrogen peroxide under selected conditions led to an increase in the strength and roughness of the membrane with significant effect on both the contact angle and porosity. Treatment with sodium hypochlorite led to a decrease in the thickness of the active layer of the membranes and their mechanical strength and a significant increase in their roughness. On the other hand, the ultrafiltration coefficient decreased after hydrogen peroxide treatment, while the screening coefficient values approached unity for both untreated and treated membranes. Microwave treated polysulfone fibers impregnated with magnesium chloride enhanced the mechanical properties of the membrane and its hydrophilicity while maintaining a stable chemical structure and did not significantly affect the porosity of the membranes. It was found that hydrogen peroxide and microwave treatment methods are promising methods for preparing hollow fiber polysulfone membranes to be used in hemodialysis equipment. تتناول هذه الرسالة تحضير أغشية الألياف المجوفة من البولي السلفون المستخدمة فى أجهزة الغسيل الكلوي وإختبارها. ويبدأ ذلك بتحضير الألياف المجوفة بتقنية الغزل الجاف - الرطب، ثم إستخدام أساليب مختلفة للمعالجة الكيميائية للسطح من حيث نوعية محاليل الأكسدة المستخدمة وكذلك نظام معاملة سطح الأغشية بالموجات الدقيقة. كما تمت دراسة تأثير هذه المعالجات على خصائص الغشاء وأدائه من حيث نفاذية الماء النقي ومعامل الغربلة لليوريا والكرياتينين. وقد أظهرت النتائج أن المعالجة بفوق أكسيد الهيدروجين تحت ظروف مختارة تؤدى إلى زيادة متانة الغشاء وخشونته وأنها غير ذات تأثير يذكر على كل من زاوية التلامس والمسامية. أما المعالجة بإستخدام هيبوكلوريت الصوديوم فهي تؤدى إلى إنخفاض سمك الطبقة النشطة من الأغشية وقوتها الميكانيكية وزيادة ملحوظة في خشونتها. ومن ناحية أخرى، انخفض معامل الترشيح الفائق بعد المعاملة بفوق أكسيد الهيدروجين، بينما اقتربت قيم معامل الغربلة من الواحد الصحيح لكل من الأغشية غير المعالجة والمعالجة. أما المعالجة بالموجات الدقيقة لأغشية البولي السلفون مع إستخدام كلوريد الماغنيسيوم فقد أدت إلى تعزيز الخواص الميكانيكية للغشاء وجذبها للماء مع الحفاظ على بنية كيميائية مستقرة ولم يؤثر ذلك بشكل ملحوظ على مسامية الأغشية. وإنتهت الرسالة إلى أن المعالجة بفوق أكسيد الهيدروجين وتطبيق أسلوب تعريض الأغشية للموجات الدقيقة تعتبر أسلوباً واعداً لتحضير أغشية الألياف المجوفة من البولى سلفون المستخدمة في معدات الغسيل الكلوي.
Text in English and abstract in Arabic & English.
Chemical Engineering الهندسة الكيميائية
Hemodialysis Hollow fiber; Membrane Polysulfone Post treatment