Effect of flexural, and punching shear reinforcement on the punching behaviour of reinforced concrete flat slabs / by Ahmed Abdallah Saiedahmed Elgohary ; Supervision Prof. Dr. Mohamed Rabie Mahmoud Hussain, Dr. Mohamed Samy Yousef.
نوع المادة :
نصاللغة: الإنجليزية لغة الملخص: الإنجليزية, العربية المنتج: 2025الوصف: 103 pages : illustrations ; 30 cm. + CDنوع المحتوى: - text
- Unmediated
- volume
- تأثير صلب تسليح الإنحناء والكانات علي سلوك القص الثاقب للبلاطات الخرسانية المسلحة [عنوان مضاف عنوان الصفحة]
- 624.1
- Issued also as CD
| نوع المادة | المكتبة الحالية | المكتبة الرئيسية | رقم الاستدعاء | حالة | الباركود | |
|---|---|---|---|---|---|---|
Thesis
|
قاعة الرسائل الجامعية - الدور الاول | المكتبة المركزبة الجديدة - جامعة القاهرة | Cai01.13.05.Ph.D.2025.Ah.E (استعراض الرف(يفتح أدناه)) | Not for loan | 01010110093866000 |
Thesis (Ph.D)-Cairo University, 2025.
Bibliography: pages 101-103.
Punching shear is one of the most important phenomena to be considered during the design
of reinforced concrete flat slabs, as this type of failure is brittle and occurs without prior
warning. The main factors that affect punching strength are compressive strength, and
punching reinforcement in the form of stirrups, or other shapes. In this research, eighteen
half-scale specimens are tested with square dimensions of 1100 mm, and a thickness of 120
mm. All specimens were connected to a square column of dimensions 150×150 mm. The
main parameters considered in this research included spacing between stirrups, number of
stirrups branches, concrete strength, and ratio of the flexural reinforcement. The experimental
and analytical results were analyzed and compared with the predicted values from various
international design codes. The punching shear equation was proposed that is less
conservative than the code provisions and shows closer agreement with both experimental
and analytical results.
البلاطات المسطحة لها دوراً هاماً في المباني الخرسانية نظراً لمرونتها المعمارية وتعتبر ظاهرة القص الثاقب من أهم الظواهر التي يجب مراعاتها أثناء تصميم البلاطات الخرسانية المسلحة، حيث أن هذا النوع من الانهيارات انهيار قصف ولا ينبئ بالإنذارات المسبقة قبل الانهيار، ويمكن تلخيص العوامل الرئيسية التي تؤثر على القص الثاقب في الخرسانة الي اجهاد الخرسانة، وصلب تسليح الانحناء، والكانات باشكالها المختلفة، لذلك تناول هذا البحث تقييم مساهمة صلب تسليح الانحناء الطولي، والكانات علي مقاومة القص الثاقب وذلك من خلال صب واختبار ثمانية عشرة عينة بابعاد العينات 1100×1100 مم وسمك 120 مم. يتوسط العينات عمود مربع بأبعاد 150×150 مم. وقد تم في هذا البحث دراسة متغيرات مختلفة تتنوع بين المسافة بين الكانات وعرضها وعدد فروعها ونسبة صلب تسليح الانحناء كما تم تحليل النتائج العملية والنظرية ومقارنتها بالقيم المقدرة من أكواد التصميم الدولية المختلفة ومن ثم استنتاج معادلة للقص الثاقب تكون اقل تحفظا من قيم الاكواد واقرب ما يكون للنتائج المعملية والنظرية.
Issued also as CD
Text in English and abstract in Arabic & English.
لا توجد تعليقات على هذا العنوان.