| 000 | 03912namaa22004331i 4500 | ||
|---|---|---|---|
| 003 | EG-GICUC | ||
| 005 | 20251222102258.0 | ||
| 008 | 251221s2025 ua a|||frm||| 000 0 eng d | ||
| 040 |
_aEG-GICUC _beng _cEG-GICUC _dEG-GICUC _erda |
||
| 041 | 0 |
_aeng _beng _bara |
|
| 049 | _aDeposit | ||
| 082 | 0 | 4 | _a631.875 |
| 092 |
_a631.875 _221 |
||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.04.M.Sc.2025.Ra.R | ||
| 100 | 0 |
_aRania Radwan Wehba Elazaby, _epreparation. |
|
| 245 | 1 | 0 |
_aRemoval of some heavy metals from wastewater using date pits / _cby Rania Radwan Wehba Elazaby ; Supervisors Prof.Dr. Nabil Mahmoud Abdelmonem, Prof. Dr. Ramadan Abd- Elghany Ali Elkateb. |
| 246 | 1 | 5 | _aإزالة بعض الفلزات الثقيلة من المياة العادمة باستخدام أنوية البلح |
| 264 | 0 | _c2025. | |
| 300 |
_a94 pages : _billustrations ; _c30 cm. + _eCD. |
||
| 336 |
_atext _2rda content |
||
| 337 |
_aUnmediated _2rdamedia |
||
| 338 |
_avolume _2rdacarrier |
||
| 502 | _aThesis (M.Sc)-Cairo University, 2025. | ||
| 504 | _aBibliography: pages 75-86. | ||
| 520 | 3 | _aconcentration (5–100 mg/L), contact time (0–70 min), adsorbent dose (2–20 g/L), pH (1–9), Equilibrium after 45 and 55 min for Cr(VI) and Ni(II), respectively. The removal efficiency reached 95% at optimal conditions. (FTIR), (SEM), and (BET) analyses were performed to characterize the adsorbent. The isotherm models were applied to describe the equilibrium isotherms. The values of the free energy, enthalpy, and entropy were 34.599 kJ/mol, 17.5736 kJ/mol K, and 51.58 kJ/mol K, respectively, at pH 3 for Cr(VI) and 25.283 kJ/mol, 14.8525 kJ/mol K, and 31.31 kJ/mol K, respectively, at pH 6 for Ni(II). Kinetics of the adsorption was analyzed. The pseudo-first-order was suitable for Cr(VI), and the pseudo-second-order model was suitable for the Ni(II). The maximum adsorption capacities were 110.02 mg Cr(VI)/g and 10.1 mg Ni(II)/g. | |
| 520 | 3 | _aتتعلق الاطروحة الحالية بتطبيق تقنية نواة البلح لمعالجة المياه العادمة المحتوية على معادن ثقيلة مثل الكروم والنيكل. تعتبر إزالة الكروم والنيكل عملية سريعة في الواقع، عند الرقم الهيدروجيني 3، الرقم الهيدروجيني 6 لـ Cr(VI) وNi(II) على التوالي. وتتوافق درجة حرارة الامتزاز بشكل جيد مع نموذج Langmuir لـ Cr(VI) ونموذج Templin لـ Ni(II). وتتبع الحركية نموذجًا من الدرجة الأولى لـ Cr(VI) ونموذجًا من الدرجة الثانية لـ Ni(II). تشير القيمة الموجبة لـH∆ إلى أن العملية ماصة للحرارة بالنسبة لـ Cr(VI) ولكنها طاردة للحرارة في حالة Ni(II) وتم تأكيد إزالة الكروم والنيكل خلال نتائج SEM وBET وFTIR. تظهر هذه النتائج أن ازالة الكروم والنيكل بواسطة DP يخضع للامتصاص على السطح الخارجي بنسبة 99.7%. | |
| 530 | _aIssues also as CD. | ||
| 546 | _aText in English and abstract in Arabic & English. | ||
| 650 | 0 | _aHeavy metals | |
| 650 | 0 | _aالفلزات الثقيلة | |
| 653 | 1 |
_aAdsorption isotherm _achromium (VI) _adate pits _akinetics _anickel (II) _athermodynamic parameters _aالكروم السداسي _aالنيكل الثنائي |
|
| 700 | 0 |
_aNabil Mahmoud Abdelmonem _ethesis advisor. |
|
| 700 | 0 |
_aRamadan Abd- Elghany Ali Elkateb _ethesis advisor. |
|
| 900 |
_b01-01-2025 _cNabil Mahmoud Abdelmonem _cRamadan Abd- Elghany Ali Elkateb _dOsama Abdel-Bary Ibrahim _dSheren Samir _UCairo University _FFaculty of Engineering _DDepartment of Chemical Engineering |
||
| 905 | _aShimaa | ||
| 942 |
_2ddc _cTH _e21 _n0 |
||
| 999 | _c176906 | ||