| 000 | 03986namaa22004331i 4500 | ||
|---|---|---|---|
| 003 | EG-GICUC | ||
| 005 | 20260504152608.0 | ||
| 008 | 260504s2025 ua a|||frm||| 000 0 eng d | ||
| 040 |
_aEG-GICUC _beng _cEG-GICUC _dEG-GICUC _erda |
||
| 041 | 0 |
_aeng _beng _bara |
|
| 049 | _aDeposit | ||
| 082 | 0 | 4 | _a628.3 |
| 092 |
_a628.3 _221 |
||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.04.M.Sc.2025.Ma.E | ||
| 100 | 0 |
_aMarwa Khalaf Mohamed Kamel, _epreparation. |
|
| 245 | 1 | 0 |
_aFabrication and characterization of polymeric membranes from recycled polystyrene for wastewater treatment / _cby Marwa Khalaf Mohamed Kamel ; Supervisors Prof. Dr. Mai Mohamed Kamal, Prof. Dr. Heba Abdallah Mohamed. |
| 246 | 1 | 5 | _aتصنيع وتوصيف الاغشية البلومرية من البولسترين المعاد تدويره لمعالجة مياه الصرف الصحى |
| 264 | 0 | _c2025. | |
| 300 |
_a62 pages : _billustrations ; _c30 cm. + _eCD. |
||
| 336 |
_atext _2rda content |
||
| 337 |
_aUnmediated _2rdamedia |
||
| 338 |
_avolume _2rdacarrier |
||
| 502 | _aThesis (M.Sc)-Cairo University, 2025. | ||
| 504 | _aBibliography: pages 54-62. | ||
| 520 | 3 | _aIn this research, the manufacture of membranes from polystyrene plastic waste was studied. The membranes were manufactured using different proportions of polystyrene using polyvinylidene fluoride multi-wall carbon nanotube polymer to improve the properties and performance of the membrane. The membrane was cast on polypropylene and polyester supports. The results showed that the best membranes were multi-wall carbon nanotube membranes, as they provided the highest separation percentage of hemic acid which reached 97.7% and 99.9%. Meanwhile, the permeate flux was 73.2 LMH and 76.1. The membranes exhibited antifouling behaviour, where FRR was 99.6% and 97.9%. Rr & Rir were 25.2 % and 0.44% respectively. Rr & Rir were 26.9% and 2.3% respectively. Contact angle 79.4&69.6. | |
| 520 | 3 | _aفى هذا البحث، تمت دراسة تصنيع الأغشية من نفايات البلاستيك المصنوعة من البوليسترين. صُنعت الأغشية باستخدام نسب مختلفة من البوليسترين باستخدام بوليمر أنابيب الكربون النانوية متعددة الجدران من فلوريد البولي فينيلدين لتحسين خصائص وأداء الغشاء. صُب الغشاء على دعامات من البولي بروبيلين والبوليستر. أظهرت النتائج أن أفضل الأغشية كانت أغشية أنابيب الكربون النانوية متعددة الجدران، حيث وفرت أعلى نسبة فصل لحامض الهيمك والتي وصلت إلى 97.7٪ و 99.9٪. في الوقت نفسه، بلغ تدفق النفاذية 73.2و76.1 ل/م2 . س. أظهرت الأغشية سلوكًا مضادًا للحشف، حيث بلغت نسبة استرداد التدفق 99.6٪ و 97.9٪. كان نسبة التلوث العكسى ونسبة التلوث الغير عكسى 25.2٪ و 0.44٪ على التوالي. كان نسبة التلوث العكسى ونسبة التلوث الغير عكسى 26.9٪ و 2.3٪ على التوالي. زاوية التلامس° 79.4 و °69.6. | |
| 530 | _aIssues also as CD. | ||
| 546 | _aText in English and abstract in Arabic & English. | ||
| 650 | 0 | _aWastewater treatment | |
| 650 | 0 | _aمعالجة مياه الصرف الصحى | |
| 653 | 1 |
_aPolystyrene _aWastewater _aMembrane _aMultiwall carbon nanotube _aPlastic _aبولى استيرين _aمواد نانومترية |
|
| 700 | 0 |
_aMai Mohamed Kamal _ethesis advisor. |
|
| 700 | 0 |
_aHeba Abdallah Mohamed _ethesis advisor. |
|
| 900 |
_b01-01-2025 _cMai Mohamed Kamal _cHeba Abdallah Mohamed _dReem Sayed Mohamed Ettouney _UCairo University _FFaculty of Engineering _DDepartment of Chemical Engineering |
||
| 905 | _aShimaa | ||
| 942 |
_2ddc _cTH _e21 _n0 |
||
| 999 | _c179966 | ||