| 000 | 01984cam a2200361 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223030156.0 | ||
| 008 | 100124s2009 ua dh f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.12.M.Sc.2009.Ma.S | ||
| 100 | 0 | _aMaiada Sayed Mahmoud Mahmoud | |
| 245 | 1 | 0 |
_aSimulation of haz in duplex and super duplex stainless steels by heating in the range 475 - 950{u00BA}C/ _cMaiada Sayed Mahmoud Mahmoud ; Supervised Mohamed R. Elkoussy , Nahed A. Abdelraheem , Randa M. Abdelkarim |
| 246 | 1 | 5 | _aمحاكاة المنطقة المتأثرة بالحرارة فى صلب الدوبلكس والسربر دوبلكس بالتسخين فى المنطقة من 475 حتى 950 درجة مئوية |
| 260 |
_aCairo : _bMaiada Sayed Mahmoud Mahmoud , _c2009 |
||
| 300 |
_a130P. : _bcharts , facsimiles ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Metallurgical Engineering | ||
| 520 | _aThe present study was aimed at : a) comparison of the behavior of duplex (DSS) and super duplex (SDSS) in conditions of overheating in the range 475 - 950{u00BA}C, b ) simulate excessive heat input during welding of DSS and SDSS by heating to the 475 - 900{u00BA}C for short time (10 minutes ), c) simulate the conditions of overheating during service and during slow cooling after hot forging of large pieces of SDSS and DSS by heating to the 475 - 950{u00BA}C for longer time (30 and 60 minutes) | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aDuplex | |
| 653 | 4 | _aStainless steels | |
| 653 | 4 | _aSuper duplex | |
| 700 | 0 |
_aMohamed Rafat Elkoussy , _eSupervisor |
|
| 700 | 0 |
_aNahed Ahmed Abdelraheem , _eSupervisor |
|
| 700 | 0 |
_aRanda Mohamed Abdelkarim , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 902 | _a1 | ||
| 905 |
_aFatma _eCataloger |
||
| 905 |
_aNazla _eRevisor |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c29197 _d29197 |
||